7T Swinger Well-Known Member Joined Mar 31, 2009 Messages 127 Reaction score 65 Mar 31, 2009 #1 Wondering if someone can tell me the procedure for replacing pass side motor mount? Thanks in advance
Wondering if someone can tell me the procedure for replacing pass side motor mount? Thanks in advance
Burntorange70 Well-Known Member Joined Feb 18, 2008 Messages 12,873 Reaction score 147 Location Aguanga, CA. Apr 1, 2009 #2 Welcome to FABO! Unbold the old one and bolt the new one in. Easy as that.
fishy68 Tyr Fryr's Inc. Joined Jan 11, 2005 Messages 16,584 Reaction score 1,264 Location Central, IL (Hooterville) Apr 1, 2009 #3 You'll also have to lift the engine to get it in and out. I use a floor jack with a 6 inch square 2x6 between the oil pan and jack (so you don't dent in the pan) to lift them with. It's about a 45 minute job.
You'll also have to lift the engine to get it in and out. I use a floor jack with a 6 inch square 2x6 between the oil pan and jack (so you don't dent in the pan) to lift them with. It's about a 45 minute job.
7T Swinger Well-Known Member Joined Mar 31, 2009 Messages 127 Reaction score 65 Apr 1, 2009 #4 Thanks. That's the answer I was hoping for.