1970 DODGE 340 SIX PACK vs THE WORLD Richard Holdener

-
IQ52 said:
It was fun building one of those 340 Six Packs once.
Click to expand...
And only once because you’ll not do that again?
IQ52 said:
Here....this one made 413 lb-ft & 421 hp. Stock stroke and .030" overbore. I cannot find the cam card but I remember it was a custom solid flat tappet, 106 LSA on 103 ICL. Probably around .500" lift.
Click to expand...
If you ever find it……
:thumbsup:
 
IQ52 said:
Here....this one made 413 lb-ft & 421 hp. Stock stroke and .030" overbore. I cannot find the cam card but I remember it was a custom solid flat tappet, 106 LSA on 103 ICL. Probably around .500" lift. 9.37:1 compression ratio. Factory iron heads 261 cfm @ .500" lift.
Click to expand...
Actually found the 2017 thread on it. I never listed the cam specs. So with no cam card I now even have secret from myself!

1970 T/A Challenger with no oil pressure.

413/421 was from a pull after the one shown in the above thread.
 
You must log in or register to reply here.
-

Back
Top