[SOLD] 1971 Plymouth Duster NJ

-
Status
Not open for further replies.

Cliffjumper

Well-Known Member
Joined
Nov 5, 2008
Messages
240
Reaction score
2
Location
New Jersey
Rating - 0%
0   0   0
Contact seller
For Sale
1971 Plymouth Duster or Parts Car
Blue/Blue
Title in Hand
$3500
Located near Belmar, NJ 07715

Purchased the vehicle 3 years ago with intentions of parting it here on the Forum.
I don't have the guts to scrap the chassis so I started working on it. Fixing imperfections and modifications.
Making room for family purposes and provided options on how i would prefer to sell.
Details provided below.

Chassis/Brakes:
The car has rust in normal areas though is solid. Left the exterior with an old Earl Scheib's paint job from the cowl-back.
All welding and chassis work has been done by a professional in Central New Jersey.
Mopar Performance Rear Leaf Spring Relocation Kit installed.
Super Stock 002/003 Springs, A Body 8 3/4 Strange spool with Drag Gear (489 Case).
The axles have been modified for 1/2" ARP wheel studs. Chrysler steel wheels, Right Stuff rear disc kit LBP.
Floor pans were recovered with 3M undercoat system after surface was prepped.
Interior floor and firewall has been prepped and painted.
Engine bay has been painted, front and rear wheel wells.
Slant6 K member, torsion bars, manual steering box and center link are original. 340 Duster control arms.
Right Stuff Front wheel disk brake kit LBP.
Moog bushings, tie rod ends and RMS adjustable strut bars. Chrysler steel wheels.

Interior:
Rebuilt manual steering column shift, Original steering wheel.
Headliner and interior panels untouched. Dash frame has been painted on a budget.
Windshield removed.

All remaining parts will also be sold with the car.
I have a collection exterior panels, standard grills, badging and trim.
Rear seat, front bench seat, dash components interior panels and seat belts.
Heater Box is original and controls. Wipers with new seal kit, Firewall Gaskets and Body Plugs.
Harness and gauges in working order when removed.

Missing:
Front Bumper, Dr./Pass. fenders, cracked windshield, wiper motor, gas tank, fuel system, all hard lines, brake booster and master cylinder.

Additional:
5.9 Magnum removed from a 2001 R/T Dakota 5spd available $250
904 core is available $50

I have had a few Plymouths in the past 10 years. This car needs to be put back together.
I am firm with my price, though am willing to negotiate.
Everything for $3500
Striped chassis/brakes/title ONLY $3000
Please contact me if interested.

image.jpg11_zps3ppcezqv.jpg
[/URL][/IMG]

image.jpg14_zpsl9w5tebq.jpg
[/URL][/IMG]

image.jpg12_zpsk8ggun9x.jpg
[/URL][/IMG]

image.jpg16_zpshzho6i3i.jpg
[/URL][/IMG]

image.jpg15_zpstaotc8ph.jpg
[/URL][/IMG]

image.jpg18_zpsk72jvlvg.jpg
[/URL][/IMG]

image.jpg22_zpsetbmjdgp.jpg
[/URL][/IMG]

image.jpg23_zpsjmiq56go.jpg
[/URL][/IMG]

image.jpg20_zpszmfbzytn.jpg
[/URL][/IMG]

image.jpg19_zpssk8ail9h.jpg
[/URL][/IMG]

image.jpg21_zpsb1vftvse.jpg
[/URL][/IMG]

image.jpg24_zpsbhor4zxe.jpg
[/URL][/IMG]
 
Any sail panels still in there? The cardboard things under the headliner by the back window.

Thanks
 
It looks like you got a good start. Hey can you post a picture of the 5-speed or PM it to me? Thanks!
 
Price drop for the chassis. Leaving the glass and trunk lid. Installing steering column and dash frame $2500
 
I will be cutting the car up for scrap.
Not the way I would like to see this car go.

Parts will be sold individually.
 
For Sale
1971 Plymouth Duster or Parts Car
Blue/Blue
Title in Hand
$3500
Located near Belmar, NJ 07715

Purchased the vehicle 3 years ago with intentions of parting it here on the Forum.
I don't have the guts to scrap the chassis so I started working on it. Fixing imperfections and modifications.
Making room for family purposes and provided options on how i would prefer to sell.
Details provided below.

Chassis/Brakes:
The car has rust in normal areas though is solid. Left the exterior with an old Earl Scheib's paint job from the cowl-back.
All welding and chassis work has been done by a professional in Central New Jersey.
Mopar Performance Rear Leaf Spring Relocation Kit installed.
Super Stock 002/003 Springs, A Body 8 3/4 Strange spool with Drag Gear (489 Case).
The axles have been modified for 1/2" ARP wheel studs. Chrysler steel wheels, Right Stuff rear disc kit LBP.
Floor pans were recovered with 3M undercoat system after surface was prepped.
Interior floor and firewall has been prepped and painted.
Engine bay has been painted, front and rear wheel wells.
Slant6 K member, torsion bars, manual steering box and center link are original. 340 Duster control arms.
Right Stuff Front wheel disk brake kit LBP.
Moog bushings, tie rod ends and RMS adjustable strut bars. Chrysler steel wheels.

Interior:
Rebuilt manual steering column shift, Original steering wheel.
Headliner and interior panels untouched. Dash frame has been painted on a budget.
Windshield removed.

All remaining parts will also be sold with the car.
I have a collection exterior panels, standard grills, badging and trim.
Rear seat, front bench seat, dash components interior panels and seat belts.
Heater Box is original and controls. Wipers with new seal kit, Firewall Gaskets and Body Plugs.
Harness and gauges in working order when removed.

Missing:
Front Bumper, Dr./Pass. fenders, cracked windshield, wiper motor, gas tank, fuel system, all hard lines, brake booster and master cylinder.

Additional:
5.9 Magnum removed from a 2001 R/T Dakota 5spd available $250
904 core is available $50

I have had a few Plymouths in the past 10 years. This car needs to be put back together.
I am firm with my price, though am willing to negotiate.
Everything for $3500
Striped chassis/brakes/title ONLY $3000
Please contact me if interested.

image.jpg11_zps3ppcezqv.jpg
[/URL][/IMG]

image.jpg14_zpsl9w5tebq.jpg
[/URL][/IMG]

image.jpg12_zpsk8ggun9x.jpg
[/URL][/IMG]

image.jpg16_zpshzho6i3i.jpg
[/URL][/IMG]

image.jpg15_zpstaotc8ph.jpg
[/URL][/IMG]

image.jpg18_zpsk72jvlvg.jpg
[/URL][/IMG]

image.jpg22_zpsetbmjdgp.jpg
[/URL][/IMG]

image.jpg23_zpsjmiq56go.jpg
[/URL][/IMG]

image.jpg20_zpszmfbzytn.jpg
[/URL][/IMG]

image.jpg19_zpssk8ail9h.jpg
[/URL][/IMG]

image.jpg21_zpsb1vftvse.jpg
[/URL][/IMG]

image.jpg24_zpsbhor4zxe.jpg
[/URL][/IMG]
I will be cutting the car up for scrap.
Not the way I would like to see this car go.

Parts will be sold individually.
Im interested in the grill for my 71 valiant.
 
I will be cutting the car up for scrap.
Not the way I would like to see this car go.

Parts will be sold individually.

(I'm not trying to be a downer or disrepectful.)
Me 2 but, IMO, I think your a bit high on price even on the reduction.
Do you have and/or install the missing glass?
Do you have any wiring? Or other parts that go with the car missing from the photos and list?
It would be a beautiful start if it were more complete amking the price a bit more worthy.
I do realize you have a good penny inthe rear and other parts.

Saying your going to Cut it up is not going to help sell it.

Canyou transport it?
Is a trade of any interest?

just looking to help. I really hate to see a good potentail start go away.
 
Rumblefish
Glass is there. No windshield. No engine harness.
No trades.
I cannot transport.
Why spend 25k I don't have on building a car I can only sell for 12k if I need to in the future. Welding alone cost $800 so far.
I don't do bodywork. I can't weld. I make minimum wage.

My family needs help so I am sacrificing my favorite Hobby.

I can cut this car up and scrap it. Cheap people looking for a fanominal deal text me constantly. Put it this way, parts are brand new, and your getting the car/title for free. $2500 is a great deal but $1000 is just stupid.

I think a person looking to call me about it would suffice. Ask for my number. This computer BS is getting old.
 
Rumblefish
Glass is there. No windshield. No engine harness.
No trades.
I cannot transport.
Why spend 25k I don't have on building a car I can only sell for 12k if I need to in the future. Welding alone cost $800 so far.
I don't do bodywork. I can't weld. I make minimum wage.

My family needs help so I am sacrificing my favorite Hobby.

I can cut this car up and scrap it. Cheap people looking for a fanominal deal text me constantly. Put it this way, parts are brand new, and your getting the car/title for free. $2500 is a great deal but $1000 is just stupid.

I think a person looking to call me about it would suffice. Ask for my number. This computer BS is getting old.
Good deal!!!!
 
Will entertain a trade for portable car lift.

$2500 for everything. Think that is fair for a mid-project price.
5.9 magnum and 904 trans goes as well.

No scrap yard for this car. It'll haunt me.
 
Status
Not open for further replies.
-
Back
Top