Yamridr38
Member
1971 Plymouth Scamp. Car is solid. Comes with 408 Magnum that needs assembled.
Located in Killen Alabama. Asking 14k
CAR
• Weld draglites, 275/60r15 on rear
• 8 3/4 narrowed 410s posi moser axles
• Front disc brakes
• Super stock springs
• Springs relocated to frame rails
• Electric fuel pump
MOTOR
• 360 Magnum bored .030 over
• Forged scat 4340 crank internal balance
• Forged scat I beam rods
• Forged Icon 27cc dish pistons
• Edelbrock RPM Magnum heads 58cc
• Comp XR286HR-10 cam
• Comp ultra pro Magnum roller rockers
• Edelbrock hardened push rods
• Moroso deep oil pan
• Edelbrock RPM air gap intake
• Holley 700 with fuel rail
• CVF serpentine pulleys
• Aluminum radiator with electric fan
• Hooker headers & Dynomax ultra flows
Trans
• 727
• CRT Pro Street reverse valve body with billet servo
• Cheetah ratchet shifter
Can send more pics or answer any questions. I have a few more things for it not listed.
Located in Killen Alabama. Asking 14k
CAR
• Weld draglites, 275/60r15 on rear
• 8 3/4 narrowed 410s posi moser axles
• Front disc brakes
• Super stock springs
• Springs relocated to frame rails
• Electric fuel pump
MOTOR
• 360 Magnum bored .030 over
• Forged scat 4340 crank internal balance
• Forged scat I beam rods
• Forged Icon 27cc dish pistons
• Edelbrock RPM Magnum heads 58cc
• Comp XR286HR-10 cam
• Comp ultra pro Magnum roller rockers
• Edelbrock hardened push rods
• Moroso deep oil pan
• Edelbrock RPM air gap intake
• Holley 700 with fuel rail
• CVF serpentine pulleys
• Aluminum radiator with electric fan
• Hooker headers & Dynomax ultra flows
Trans
• 727
• CRT Pro Street reverse valve body with billet servo
• Cheetah ratchet shifter
Can send more pics or answer any questions. I have a few more things for it not listed.
