1972 Duster

[MACKIN]

Oh well this Economy forces this.

I put a ton of money into this car . New Quarters ,doors etc etc. Car has a one piece fiberglass tilt nose. Car is in primer

Looking to sell the entire car for parts and along with numerous old and NEW parts to put back together or for your project.I have most of the glass and interior pieces. I have wiring harnesses plus a new Painless harness in the box. I have a center console ,Ultra light alum rims with brand new MT DOT slicks,stainless steel brake lines in the box,new Dash pad, etc etc etc lots of parts.

The car is Mini tubed professionally done. Has the desired 8 3/4 rear with snubber and a 456 spool. Car is full framed and has been converted over to big bolt pattern so new Strange axles and all new front suspension. I have a complete TTI exhaust system new in the box and the car has brand new tires on it with after-market steel rims.

Perhaps undesired is the car is shaved with Havoc delete with poppers installed. I'm forgetting so much.

I prefer someone in the New england area for local pick up. Believe me the PARTS I have alone is worth the price I'm asking. Just need to see it all.

There are pictures here just search my posts I don't have many. The Engine transmission will be in a separate post.

I don't want to start selling parts more or less its all or nothing sorry.

Asking $5500 or best offer location central CT. If you need more pictures and your serious about a purchase then I'll get some pictures up. Please I hate to sell but I'm forced to do to economy and household repair so (not trying to come off as a a-hole ) lets not just chase each other around.

This car can be put back together or if you need a good back half tubed and a frame this is your ticket! Believe me if you had the time you could pick this up and part it out and make money.I don't have the time.

Don't be shy open to all offers! Has to sell

Thanks

 

[MACKIN]

Here are a few pictures I posted awhile ago here,again car is in primer.
http://www.forabodiesonly.com/mopar/showthread.php?t=58100

I'll over the weekend post more pictures and also pictures of the plethora of parts that go with this package deal to help find a new home.

Thanks

 

[MACKIN]

Come on Gents this gotta go! Any questions? HOPEFULLY this week in the next couple days I'm going to get more pictures up of the items that go with this car. Anything in particular?

Also I have a enclosed trailer and if someone wanted EVERYTHING FREE delivery might be possible. Depending on distance obviously. Like say 100/150 mile radius.

 

[MACKIN]

Did I mention I have a 4 speed conversion set up which includes a 883 Bellhousing flywheel peddles shifter and linkage which is shippable as I have a crate ready to go? No steering column but if you have a floor shifter auto your golden.

 

[MACKIN]

$5000 Takes it all

If someone had the time,I don't ,they could pick all this up and piece it out and make some money.

I have I believe all the seals ,doors,trunk,etc. Old and new (Painless) wiring harnesses. I have a center console. Brand new in the box Stainless brake lines. A brand new dash pad and other interior panels ,black.

If you had a A body or a Duster or a Demon you could put your front clip on this car and have a big bolt pattern car that is FULL framed with relocated Super Stock Springs the good 8 3/4 rear that is mini tubed. You can put a huge tire on it . The tires I have and was going to run are M/T P315 /60 R15 mounted on Ultra Light polished Alum Mags. Tire is huge!

Lets us NOT forget that it has a One Piece Fiberglass front clip that I had CUSTOM lower STEEL fender panels made . That is huge if you've ever seen one of these front clips with the cheesy lowers! Really worth a look! I have two sets of rear tailights in good shape. Those alone are so hard to come by.



I also have a 360 crank that magged out and 30 over SRP 40m JE pistons and rods cast number 2899496 which will need blasting to remove slight surface rust from sitting around. No rings skirts look good!

Also a TTI X pipe brand new in the box Exhaust system! Part # XA30HW6776 thats a $700 dollar retail exhaust!

You really have to use your imagination on the possibilities of this rolling chassis. For parts or as a whole their is so much! I have the title to this car also.

I am excepting offers don't be shy!

 

[briankaplan]

I know how you feel there buddy. Trying to sell a car also. No bites at all.
My brother is trying to sell a modified S15 on craigslist. He hasn't had any
luck either. It's the damn economy.
I wish you good luck.

 

[MACKIN]

Ya kind of a pain in the *** as at that price I'm giving it away but willing to go a bit deeper. If someone had the time to take a look at it with some interest I'd bet they'd take it all.

Just the new parts alone are worth of what I'm asking. Plus I can deliver in a reasonable distance further if they want to buy the trailer. LOL

2008 28' Enclosed Pace (black) Trailer finished interior with front cabinets. Dove tail ramp with D-rings also set up for four motorcycles with removable chalks. Less than 1500 miles on the trailer . Looking to get $7500

There is one rub mark on one interior panel . Still owe a few bucks on the note like $3800. But that is simple to get'r' done.

 

[pettybludart]

Posting pics without links might get someone interested.Just sayin..Good luck.

 

[MACKIN]

Yes you are right . I will next week promise to load this thread up with pics that the Admin will be wanting to drive to CT to kick my ***! LOL

J/K I will get some pics up for you guys,thanks

 

[MACKIN]

Sorry but this hurricane has thrown of curve ball in my plans . Next week on the pics

 

[MACKIN]

Some pictures

 

[replicaracer43]

PM sent on 4 Speed!!!

 

[MACKIN]

More and more to come

 

[MACKIN]

More yet

 

[MACKIN]

BEFORE everyone goes nuts here I'm trying to sell EVERYTHING INCLUDING the car as a whole package if possible. I have alot more pics to go yet even the car and then I'll take some requests for pictures . If it doesn't go well then I'll part out

I don't want to become a Ebay seller and spend my days packing items but time will tell be patient please.

 

[MACKIN]

More

 

[MACKIN]

Few more

 

[MACKIN]

Tired of them yet?

 

[MACKIN]

Thats it for now. If there is any question shoot away. If there is any specific pictures you want let me know.

There is pictures of the glass (no windshield) any other interior pieces and rear bumper I didn't take pictures of that I have. If I think of anything else I'll post away. I do have pictures of the car of all the resto work that was done while it was being done also.

I'll leave the price for everything at $5500 and take reasonable offers. Also depending on where you are,I can deliver everything also ,also depending on final price!


Let the games begin. 8-)

 

[MACKIN]

New day ,reasonable offer(s)?

Somebody out there has to have the time to gobble this up. The time to part it out or take over the project. Don't be shy.

Hate to say it but I have in parts and labor over $1500 invested in that front clip on the lower STEEL fenders not to mention fabbing in the radiator support which there was none when I bought the car ! That does not include the cost of the front clip either! If someone had a car they wanted to lighten up for the strip all the hard work is done! It is hinged and removable also by pulling two pins! Has the nice quarter turns holding it down in place!

Any of you ever seen one of those one piece front clips and the lower fenders? The lowers I made are STEEL and fully adjustable just like the OEM fenders. Real slick!

 

[69 fstback]

how much for the total package motor and tranny i am in long island thanks

 

[69 fstback]

pm me if you want to talk thanks

 

[MACKIN]

how much for the total package motor and tranny i am in long island thanks

I don't quite understand what your saying. Motor is gone ,4 speed isn't and I am negotiable on the price.

I'll send ya a PM as requested.

Thanks

 

[dusterdan]

i'm a little confused too but i would like the sharktooth grill parking light covers, drag radials(would like more info), some of the weatherstripping, and possible the painless harness. Let me know, PM me thanks! -Dan

 

[MACKIN]

Dan

If the 'whole' package does not sell you'll be first in line for the parts you want. I have two sets of parking light lenses. The set in the grille ,grille is NFG , are near mint. That was the reason I bought the grill was just for the lenses. What do you want to know about the Wheels?

Also it's possible someone here might gobble up the entire package and part it out,I just don't have the time myself. But if it does not sell I might have to find the time unfortunately.

New day just a teaser price drop to $5000 for everything. If there is any specific photos anyone wants just ask. I'm not on this sight on the weekends,just so your aware.