[SOLD] 1973 dart sport

-
Status
Not open for further replies.
Owen 340+6

Owen 340+6

Bang em till it breaks
Joined
Dec 8, 2019
Messages
1,108
Reaction score
1,545
Location
Bay city wisconsin
Rating - 100%
3   0   0
Contact seller
Alright guys. I have a 1973 dart sport fold down rear seat car from Tennessee. With a title I started the conversion over to a 71 duster. But I bought a different duster instead.

The 73 donated its front disc brakes so the car will have small bolt pattern drums on the front here this weekend.
Small rear end
I took the clutch and brake pedal and z bar
I removed just the floor hump
I removed floor shift steering column and all the wiring from the car
Hood scoop and rear wing and traction bars pictured DO NOT with the car

Wheels and tires do go with the car

Car is coming as a roller with slant 6 k frame

Green Fenders pictured on car are no longer on it but I have 2 fenders that are beat up that can go with the car.
Has 70-72 doors on the car that need some work no rust but dents
I have a driver quality grill that goes with the car.
It needs floor pans and lower quarters
Fold down rear seat is complete and goes with the car
All windows, trim exterior and interior that is on the car now will stay I will also throw in some extra parts grill. 70-72 bezels front 70-72 bumper filler and latch assembly and correct rear side markers with patch panel to graft them in

Asking $1000 pick up in Ellsworth Wisconsin

20220821_163507.jpg


20220821_163457.jpg


20220821_163616.jpg


20220821_163610.jpg


20220821_163545.jpg


20220821_163535.jpg


20220821_163439.jpg


20220821_163431.jpg


20220821_163402.jpg


20220821_163357.jpg
 
Rear frame rails are excellent. Pictures are from a few weeks ago. I'll still removing wiring and some front suspension but will have front suspension loosely back in for transporting. Its not 100% ready to go but depends on interest whether sell whole or as parts right now that's why its in this section
Manual steering box AND power steering box included, and 2 power steering columns and 1 manual steering column included. It's a shell with a pile.of extra parts ladies and gents. Definitely getting more than your paying for I promise you that. Im in a giving mood!!!!
20210530_231450.jpg
 
Last edited:
Has the bezels to match. I believe I have 2 or 3 extra bezels as well. It's a driver quality grill. Cracks have been repaired but its presentable

20210124_171321.jpg
 
I'm interested in the car but may have to have someone come look at it for me as I am away for work currently. My folks live nearby, I'll give them a call and let you know!
 
Sounds good, as I said im still swapping some parts so it may not be ready for a couple weeks i only posted in this section because I wasn't sure if I was gonna part it or sell like described in the ad. It was all dependent on interest
 
Car is ready to go once I switch spindles weekend . Im leaving the dash to tail light harness in the car. I found a harness. For $1200 I'll include a 73+ spool mount v8 frame
 
Has both white kick panels, both white sail panels passenger side has a small blemish up in the front of panel but over all very good for a driver. im telling ya im giving away more money in parts than your paying for the works you'll make money back parting out after you take what you want.

20220927_194243.jpg


20220927_194227.jpg


20220927_194212.jpg


20220927_194201.jpg


20220927_194151.jpg


20220927_194208.jpg
 
Would like to have all this gone before snow flies!! I'm not ever going to get to this car before it gets set out in the weeds I have 4 restorations in front of this car. Would be a great candidate to cut up for race car without feeling bad. $1200 takes car and piles of parts. VIN is intact with title.
3.) 70-72 front bumpers/ brackets
2.)70-72 hoods come with car
2.) Deck lids
1.) Extra 70-71 Rh fender
1.) Set of 71 metal sail panels that are mint.
1.) Set of wheel adapters to go from 4" bolt circle to 5x4.75" (small gm)
Im cleaning shop will be adding more as I clean up.
 
Last edited:
Heres a pic of more duster parts, another front bumper/brackets, the 3 steering columns. Brand new small block headers that didnt work on a truck, duster torsion bars, all sorts of extra brackets. This is a whole trick box full in itself

20220930_170510.jpg


20220930_170452.jpg
 
Car is ready to go, I left the manual floor hump in the car as well. I'll just buy a new one rather than cut this one out.
 
You bet, I'll be sending it back out to the driveway later this week to bring another car in shop. The truck load of misc parts are at my dads in a truck I have to haul home yet but its only 10 minutes away from my place. We can figure it out if you buy it.
 
Hey! I think I'll take it. Still working on logistics, I might be able to come get it next weekend. How would you want to go about this?
 
Is it an H code car?
Put me in line to buy it if the other guy drops out.
Say the word an I will send you the money or bring cash when I pick it up.
 
Last edited:
Status
Not open for further replies.
-

Back
Top