[SOLD] 1974 Dodge Dart Swinger Parts Car

-
Status
Not open for further replies.
Did it have a/c ?
Anyone still running the OEM single plane intake and 2 brl on their 66 and later 273 would be pleased with the difference with your later intake and carb on their engine.
 
RedFish said:
Did it have a/c ?
Anyone still running the OEM single plane intake and 2 brl on their 66 and later 273 would be pleased with the difference with your later intake and carb on their engine.
Click to expand...
I have one
 
If you have have the seat front seat belts in working order I will pay fair price, all I need is the working mechanism mounted to the floor.
THANKS
 
do you still have the front both sides wheel moulding and how much and what shape are they in
 
looking for the front disc brake setup,how much thanks bob64
 
I need a left tail light bezel for my '76 Dodge Dart Custom 4-door (see 1st and 2nd picture). 74-76 Dodge tail light bezels are different depending on whether or not the car has the Dodge nameplate between the tail lights. In the 2nd picture, you can see how the Dodge nameplate overlaps the end of the tail light bezel. The 3rd picture shows how the ends of the bezels differ. Mine is the bottom one, marked “Yes” and as you can see is badly pitted so I am seeking one with very little pitting. I have found a NOS right bezel. Also, my Dodge nameplate has some damage to it (see picture 4) so I would like to find one much better. Does the car you are parting out have a good left tail light bezel and/or good Dodge nameplate? That is the original paint on my car!!!
 

Attachments

  • Tail light and nameplate pictures w arrows.jpg
    139.5 KB · Views: 232
On the front seat belts. If you look at where they bolt to the roof, there should be 2 rubber boots that cover the seat belt attachment. Condition of those ?
 
Status
Not open for further replies.
-

Back
Top