[FOR SALE] (2) 64-66 A-body Mopar buckets with 3 way position tracks

[Wacky Wayne]

(2) 64-66 A-body Mopar buckets with 3way tracks

The seats (2) need to redone, but are 100% complete.
The seat tracks have been welded/braced, bead blasted, and painted/cleared.
I have put the direct link to my craigslist add above.
Seats are located in Hubert NC 28539.
Price is $400.00 US dollars for seats w/ tracks and components, they will not be sold separately.
Depending on the distance I may be willing to either meet half way or deliver for the price in fuel both ways and 20 dollars for food I will have gas receipts

 

[65 Dartman]

FWIW, 66 seats are a lot different - quite a bit more narrow (so a coffin console fits between them) and have a hard plastic back and the tracks are different in that the mounting studs through the floor are closer together front to back and side to side as well. Your seats WILL fit a 66 once new mounting holes are drilled and a 66-up console will not be used. I am using 66 Barracuda seats in my 65 wagon along with a 68 B Body buddy seat since the seats are narrow enough to allow use of the buddy seat. Good luck with the sale!

 

[Wacky Wayne]

FWIW, 66 seats are a lot different - quite a bit more narrow (so a coffin console fits between them) and have a hard plastic back and the tracks are different in that the mounting studs through the floor are closer together front to back and side to side as well. Your seats WILL fit a 66 once new mounting holes are drilled and a 66-up console will not be used. I am using 66 Barracuda seats in my 65 wagon along with a 68 B Body buddy seat since the seats are narrow enough to allow use of the buddy seat. Good luck with the sale!

I pulled them out of a 66 barracuda. So they must have been put in after the fact. Thanks for the input