[WANTED] 2.94 ring and pinion gear for 8.25 rear end

[318willrun]

Used is fine, but must be in great condition. For a '76 8.25 rear end. I already have a carrier , however, if somebody had a carrier with the ring/pinion, ok.

Seeing what's out there, thanks.

 

[motorpirate]

Used is fine, but must be in great condition. For a '76 8.25 rear end. I already have a carrier , however, if somebody had a carrier with the ring/pinion, ok.

Seeing what's out there, thanks.

what ratio was in the housing to start with?

 

[318willrun]

what ratio was in the housing to start with?

2.45
I'm not a 8.25 expert, but to my understanding if you have a higher numeral carrier (my carrier is a 3.21), it all works just fine.