[SOLD] 273/318 Small Port Intake (Trade For Crosswind)

[805moparkid]

hey guys we need a small port intake for this stockish 273 were building and cant find anything.

any of the 4 barrel square bore stuff in aluminum would be great!

eddy SP-2P
LD4B
etc!

P.S. we will clean and blast it so no worries on spiffing it up.

 

[805moparkid]

we can sweeten the deal with a trade for this new in box Procomp (air gap knock off), I think if you cover shipping on both it would make a pretty even swap but open to offers

 

[hemi71x]

http://sacramento.craigslist.org/pts/4019346757.html

I currently have this intake for sale, locally, if your interested.

 

[805moparkid]

http://sacramento.craigslist.org/pts/4019346757.html

I currently have this intake for sale, locally, if your interested.

that looks like a standard big port intake. I need the small port intake for a 66 and up 273/318

 

[hemi71x]

that looks like a standard big port intake. I need the small port intake for a 66 and up 273/318

Well then, i haven't a clue what you mean by "small' port, and "big" port intake, for a small block cylinder head, other than a 340 engine.:dontknow:

 

[805moparkid]

Well then, i haven't a clue what you mean by "small' port, and "big" port intake, for a small block cylinder head, other than a 340 engine.:dontknow:

the 340/360 had larger ports than 273/318 (except 4 barrel 318's in the 70's had 360 tops ends as far as I know) so the intakes like the SP-2P have correct port sizes for 273/318 motors

 

[AdamR]

I have a old Edelbrock Streetmater 318 intake. Its single plane though with a real small plenum. $50 plus the ride takes it.

 

[caferacerx]

Edelbrock performer and Weiand stealth (a copy of the Edelbrock LD4B) have smaller 318 size ports,
performer RPM , LD340, and most others, have the larger 340 360 size ports

the old SP-2P intake was a small port economy/fuel mileage, intake, they have tiny runners and do not flow above 4000 RPM, good for torque on 4X4 trucks

 

[805moparkid]

Edelbrock performer and Weiand stealth (a copy of the Edelbrock LD4B) have smaller 318 size ports,
performer RPM , LD340, and most others, have the larger 340 360 size ports

the old SP-2P intake was a small port economy/fuel mileage, intake, they have tiny runners and do not flow above 4000 RPM, good for torque on 4X4 trucks

thanks for the clarification. we have a SP-2P on the 46 truck and its great! i doubt either motor will hit 3 grand so small is good.

 

[805moparkid]

I have a old Edelbrock Streetmater 318 intake. Its single plane though with a real small plenum. $50 plus the ride takes it.

hmm think its gotta be a dual plane, thanks though

 

[mikebee]

i have an ld4b i just pulled off a roller 318 i'd take 125 and shp for.

 

[805moparkid]

Thanks Guys!