[Found!] 273 4BBL throttle bracket

-
Status
Not open for further replies.
Hueyjockey

Hueyjockey

Member
Joined
Oct 25, 2014
Messages
81
Reaction score
32
Location
Fallbrook, CA
Rating - 100%
2   0   0
Contact seller
Converting my 273 2BBL to a 4BBL with a D4B intake and FiTECH EFI. I’m looking for a 4BBL throttle bracket like the picture below. Anyone have one for sale?

Thnx!
upload_2021-3-7_19-56-11.jpeg
 
So.... I have not gotten any response to my WTB post. Plan B is to make the bracket. If a member could post a top and side view photo of the bracket next to a ruler, it would help in the fabrication. Anyone out there have one they can take some pictures of?
Thanks in advance!
 
cudajoedart said:
Why not take the 2bbl bracket cut it extend & weld it that's what i did to mine
Click to expand...
Yes sir. Something the op is going to need to fabricate I bet. a stock 2 barrel bracket doesn't work well on a D4B and throw the FI in there and it compounds the problems.
 
Here's what the 2bbl and 4bbl ones look like if you plan on making one. The 4bbl is a bit longer as you can see, and has more of an offset....about an inch vs. 3/4"

cablebracket.jpg


cablebracket2.jpg
 
I ran across an extra bracket if you want to buy one instead of making one.
 
Status
Not open for further replies.
-

Back
Top