273 pushrod lenght!!Urgent!!

[Babyblue66]

What is the stock lenght of the solid lifter small block push rods? I have a 273 and need a push rod. I'm on a road trip and need to order one.

Thanks

 

[doktor_x]

After a bit of digging, it looks like you're after 7.344 x 0.312 according to posting found at:
http://www.cuda-challenger.com/cc/index.php?topic=2776.0 (about 3/4 down)

I'm still trying to figure out where all of my books have run off to.

 

[toolmanmike]

oops!

 

[mattsmopars]

If I am not mistaken its 7.34 - 7.35
BTW i have a factory 273 pushrod if you need one let me know.
Matt

 

[mattsmopars]

I used these in my 340 with 273 rockers and solid lifters. They were the same length as the stock 273 pushrods I had and worked out great. P4529541
Since mopar has not made these in a while its sort of hard to come by.
Matt

 

[toolmanmike]

I just read a post that says 7.34. I cant believe the factory service manual doesn't have those specs. My rebuild book lists 7 11/32" which would be 7.34.
toolman again

 

[mattsmopars]

http://www.southeastrt.com/catalog/index.php?cat=24&item=185

Here is a website that tells the different pushrod lengths.
Matt