[WANTED] 318 Motor Mounts for 66' Cuda

[66Kooda]

Looking for motor mounts for my S6 / 318 motor swap. Looks like everything on the web is out of stock.

 

[blewbyu]

pm

 

[65 Dartman]

You looking for the rubber biscuits or steel brackets

 

[66Kooda]

We need everything required to install the V8.

 

[Professor Fate]

We need everything required to install the V8.

Then keep your eyes peeled for a V8 centerlink, too- if you don't already have one.
And the V8 throttle pedal/cable assembly.

 

[66Kooda]

Then keep your eyes peeled for a V8 centerlink, too- if you don't already have one.
And the V8 throttle pedal/cable assembly.

Yes, definitely need both of those. Had a center link sourced but it ended up being damaged.

 

[motorpirate]

An early A has the same K frame for slant or SB.
All you need is a set of factory 273 mounts, and maybe the dropped center link.( I have seen 2 that worked without it).
The pass mount needs a tab added for a Magnum engine, but I dont think its needed for an LA motor.

 

[66Kooda]

An early A has the same K frame for slant or SB.
All you need is a set of factory 273 mounts, and maybe the dropped center link.( I have seen 2 that worked without it).
The pass mount needs a tab added for a Magnum engine, but I dont think its needed for an LA motor.

Sounds right.
I will definitely need the V8 link that has the drop down in it.

 

[motorpirate]

Sounds right.
I will definitely need the V8 link that has the drop down in it.

really, you won't know for sure until ypu slide it in there.. I have seen them clear with the slant center link on 2 different cars.

 

[ddartdude]

If it's for a 66 a-body, it should have the dropped center link already. They came that way from the factory.

 

[66Kooda]

Mine appears to have the straight one.

 

[69FBCuda]

Where is "Patriot" new England?