318 refresh running. My 16 year old sons first rebuild

-
prorac1

prorac1

Well-Known Member
Joined
Sep 29, 2012
Messages
1,510
Reaction score
1,341
Location
Martin, Mi
I just wanted to congratulate my son Jason Lee (@Prorac2 ), on his first engine refresh.

1983 318. Out of a Ramcharger. Good runner, but a severely neglected plow truck engine.

Engine before

IMG_0459.JPG
IMG_0461.JPG


Rob, @RustyRatRod , along with @TrailBeast , and @nm9stheham, and many others helped immensely with help and information.

RustyRatRod helped us choose the cam. It's a 214/224, .444/.466, installed and degreed in at a 105 ICL.

I taught Jason how to degree a cam, lap valves, measure valve spring height, and install bearings on this engine.

We had a lot of fun. And he learned a lot.

Geoff @cosgig hooked us up on more parts than I can even begin to remember.

IMG_3390.JPG
IMG_3465.JPG
IMG_3467.JPG
IMG_3469.JPG
IMG_3522.JPG
IMG_3529.JPG
IMG_3530.JPG
IMG_3531.JPG


I apologize if I left anybody out. Everyone on this board has been like family. Thank you.


They say it takes a village to raise a child. Thank you all for being part of that village. I'm so proud of the young man Jason is becoming, and all of you are part of that.

Thank you, for everything. Eric
 
This has been a fantastic build. This is true magazine material. I am proud to have been a small part of it. All of this with his dad and granddad. How much more special could that have been?
 
prorac1 said:
I just wanted to congratulate my son Jason Lee (@Prorac2 ), on his first engine refresh.
Click to expand...
Hello,
Nice job on bring up a son that will spend time with his family doing a rite of passage that so meany of us went through as boys our self's.
We need more fathers like your self.
P/S i also like the haircut.
Keep up the hard work.
Happy Mopar :)
Arron
 
Arron tate said:
Hello,
Nice job on bring up a son that will spend time with his family doing a rite of passage that so meany of us went through as boys our self's.
We need more fathers like your self.
P/S i also like the haircut.
Keep up the hard work.
Happy Mopar :)
Arron
Click to expand...

The Thrush hat ain't bad either! :)

Is there a build thread on this anywhere? I would love to take a look/read. Thank you for spending time with your son like that, it is so very important.
 
I agree with all of the above. It takes a village to help nurture our young folks nowadays, and the many fine members here have done just that. Jason is such a smart, dedicated and personable young man, honors himself and his entire family, and does his best at everything he does and it shows! Congratulations Jason, You and your dad and grandpa have done an outstanding job on your car. Now, if Winter would just make an early exit this year, you can get down to the business of whooping up on Dad’s Valiant!!
 
That young man has done something so very few take interest in now. Bring a classic to life. I can only imagine the way he felt when it first fired up. A great sense of pride comes to mind.
Congratulations to all 3 of you.
Job well done
 
Nice hoodie, my kind of town, want for nothing except peace and quite. LMAO!!!!
83798280-0B85-4D6D-8A88-3266CE33D7C6.jpeg


Congrats! Enjoy!
 
I grew up down the block in Seaford. You’ll be close by.
 
It just doesn't get any better than this!!! Congrats on a job well done with family!!!

Thanks for sharing.
 
great job J.
let me know when your gonna do your shakedown run at martin, ill drag the duster out there and come drool all over your valiant
 
diymirage said:
great job J.
let me know when your gonna do your shakedown run at martin, ill drag the duster out there and come drool all over your valiant
Click to expand...

For sure bud. We plan on doing a lot of cruising this summer.

We still have a lot of carb tuning and timing to work on. And finishing the rest of the car. LOL. But it’s on the downhill slide now. LOL
 
Thank you everyone for the kind words. ever since I joined this board it’s been nothing but help and support and I just want everyone to know what that means to my grandfather father and I. Being on this board has been amazing I look at you guys like a second family. This whole project with my grandfather my dad and i has been a big learning experience for us and I’m glad you were all here to see it.
Thank you a body family.
Jason L
 
Heck yeah man! I wish I could hear it in person.......but in the meantime, get us a GOOD video of it from behind. I'll post it if yall still caint.
 
Congrats to Jason and a big pat on the back to Dad and all who helped. What a great story here.
 
Awesome. What a great job you did!!! I hope the 318 build i plan on for my son and i comes out half as good as yours did.
 
You must log in or register to reply here.
-

Back
Top