[SOLD] 340 block

-
Status
Not open for further replies.
chaskscott

chaskscott

Member
Joined
Jan 10, 2018
Messages
17
Reaction score
4
Location
New Port Richey FL
Rating - 0%
0   0   0
Contact seller
340 Mopar engine block. Engine code 2780930-340-6. The casting date is 7-9-69. The block has been cleaned, magnafluxed. No cracks. The block is mic'd to 4.070. These blocks are rare and getting really hard to find. Would be great for your Mopar restoration or a restomod. These are awesome engines that make a lot of power. Buyer is responsible for shipping. I can box up on a pallet and deliver to Fastenall for store to store delivery. I will assist any way I can. Item is sold as is. The price is $475.00 No returns, no refunds, no exchanges.

blue 340 block 3.JPG


blue 340 block 4.JPG


blue 340 block 1.JPG


blue 340 block 5.JPG


blue 340 block 6.JPG
 
Last edited:
Passenger side of the block down low, right above the oil pan rail.

Can you post a photo of the numbers stamped there please?
 
The block is mic'd to 4.070 and should have sleeves ?
What do you mean ? the block is sleeved ? how many ?
 
SLEEVES?? Do you mean there are problems inside the cylinders, or you believe the bore to be already so big that sleeves will be needed?
 
harrisonm said:
SLEEVES?? Do you mean there are problems inside the cylinders, or you believe the bore to be already so big that sleeves will be needed?
Click to expand...

My interpretation of his add is as follows. He wants 600 bucks for a block that he says needs sleeves. I take that to mean EIGHT SLEEVES. A 600 dollar block that needs EIGHT SLEEVES. So that's a 600 dollar block that needs 1500 bucks worth of repair.
 
brian6pac said:
The block is mic'd to 4.070 and should have sleeves ?
What do you mean ? the block is sleeved ? how many ?
Click to expand...
I had the wrong information on the bore size of a stock 340. If the stock 340 bore size is 4.040, then my block has been bored to 0.030 over (@ 4.070). This block does not have sleeves and does not need to be sleeved. Please correct me if I'm wrong. Thank you for your help
 
RustyRatRod said:
My interpretation of his add is as follows. He wants 600 bucks for a block that he says needs sleeves. I take that to mean EIGHT SLEEVES. A 600 dollar block that needs EIGHT SLEEVES. So that's a 600 dollar block that needs 1500 bucks worth of repair.
Click to expand...
I had the wrong information on the standard bore size of the 340. This block has been bored to 0.030 over (@ 4.070). This block does not need any sleeves. Thanks for your comments
 
harrisonm said:
SLEEVES?? Do you mean there are problems inside the cylinders, or you believe the bore to be already so big that sleeves will be needed?
Click to expand...
No, there is no problem in the cylinders. I had the wrong standard size for the stock 340. This block was bored to 0.030 over (@ 4.070) and not require any sleeves. Thanks
 
In the 1st picture I don't see any #'s in the front of the block but it's not a good picture.

Better pictures would be nice.
 
I was wondering when you can ship. I tried to message you private. No response.
 
I’ll bore size of this block is 4.075 I originally was buying this block and till I saw the receipt from the magna flux team and the recommended shop the recommendation was for this block to be sleeved or bored possibly to 60 overI am still waiting for my deposit to be returned send a text two days ago still waiting on a response
 
davescuda said:
Can you get the vin before you sell it on the passenger side please
Thanks
Click to expand...

ch1ll said:
whats going on that you cant or wont post more pictures of the stamp pad of this block or even answer personal messages? we all know that you were last seen on this site at 11:01 today.

are you really selling this block or is this some sort of game with you.
Click to expand...

VIN surface.JPG
 
Status
Not open for further replies.
-

Back
Top