340 Stroker Ideas

[D&R Const]

That is great to know!

Silly question for inquiring minds, the cranks that have Chevrolet diameter pins, do you use "off the shelf" Chevrolet rods? Not sure if the rod "width" is the same between Mopar Vs. Chevrolet.

 

[cpearce]

Silly question for inquiring minds, the cranks that have Chevrolet diameter pins, do you use "off the shelf" Chevrolet rods? Not sure if the rod "width" is the same between Mopar Vs. Chevrolet.

I used scat I beam rods that come in 2.1 rod journal, .927 wrist pin and proper width on big end for the mopar stroker cranks. Length is standard chrysler 6.123. Looking back it might actually be a Chevy rod in 6.123 length.

 

[cpearce]

I used scat I beam rods that come in 2.1 rod journal, .927 wrist pin and proper width on big end for the mopar stroker cranks. Length is standard chrysler 6.123. Looking back it might actually be a Chevy rod in 6.123 length.

Part number I used is 26125716, these are a Chevy rod and length is 6.125.

 

[D&R Const]

Very cool, thanks for sharing your knowledge. I don't know if I will ever need this info, but hopefully someone else can benefit from your experience.