360 build help

[becker11]

Hey guys,

I hope some of you can enlighten me on what improvements/changes will give me the best bang for the buck. This is what I have and it has left me wanting more power? Any suggestions are appreciated.

Crate 360
Schumacher headers
Edelbrock intake
600cfm street/strip carb
Erson Cam with 0.472 lift / 296 duration
Lunati valve springs
904 trans with 1800 stall
323 gears

 

[RustyRatRod]

If you can tell us WHICH crate 360 that would help. Welcome to FABO.

 

[FJ5]

bore it .030 and stroke it to 408.

 

[crackedback]

Edelbrock intake could mean from really excellent to piss poor smelter material!

 

[becker11]

The engine was ordered thru probuiltengines.com (part# dd06)

 

[doogievlg]

Put a blower on it!

 

[RustyRatRod]

I searched all over that site and cannot find it. Tired of goose chases. If you want advice, stop playing games and tell us what you have. We'll be glad to help. We need more info.

 

[doogievlg]

Also may try moving this to the small block section.