360 Cam selection

[Canyon]

Hey guys just lookin to see if what i have selected will be a good cam for my 360.
It's .30 over 9.5:1, J heads with bigger valves. Plan on running a 2500 stall, 4.10 with 28in tall tire. Might bump the stall up a little higher if it would be a good idea, but the cam in mind is https://www.summitracing.com/parts/cca-k20-230-4/overview/. Oh car will probably weigh 3000-3200 hopefully on the lower end of that but time will tell. Also with that cam would it be a good idea to do something like 1.6 arms or will stock be fine?
Thanks, any info is appreciated!

 

[jimmer]

I'm sure that cam will work fine !
You didn't say what c.r. You have?
That would be a limiting factor .

 

[Canyon]

I'm sure that cam will work fine !
You didn't say what c.r. You have?
That would be a limiting factor .

Its in there, 9.5:1!

 

[jimmer]

Oh ok
It should work fine !!

 

[Canyon]

Oh ok
It should work fine !!

Awesome!
Stock rockers work fine with it or should i upgrade to some 1.5 or 1.6's?

 

[jimmer]

Well a true 1.5 or 1.6 will help.
Stock rockers you would have to use 273 adjustable
If I read it right it's a solid lifter cam .

 

[jimmer]

I think I'd get some comp pro mag rockers

 

[jimmer]

One more thing .
If you don't have a converter yet ?
Call Frank Lupo dynamic converters tell them what you have they will make you the right converter !!!

 

[Canyon]

One more thing .
If you don't have a converter yet ?
Call Frank Lupo dynamic converters tell them what you have they will make you the right converter !!!

Awesome, thank you very much for the help!

 

[jimmer]

No problem !!
That's what this site is for !!
At least I think ?

 

[Abodybomber]

No problem !!
That's what this site is for !!
At least I think ?

Really?!?!!!!! lol.....