[Found!] 360 Harmonic Balancer

[tubbedamx]

Looking for a harmonic balancer for a 360.
Must be external balance, clean and in excellent shape. Aftermarket is ok to as long as it fits the OE timing cover.

Also looking for an installation tool or at least a part number of a tool that will remove and install.

Paypal ready
Shipping to 83709

Thanks Jim

 

[burdar]

They are listed new on Rockauto.com. As far as removal, you can just use a thick flat piece of metal with two holes drilled into it that are spaced the same as the lower pulley holes. Loosen the big crank nut and use that to press against as you tighten the two other bolts. The balancer will pull right off.

 

[Demonracer]

I'm pretty sure I have a balancer, PM me if interested.

 

[physixx]

I have one that's in great shape but has the hub sleeve on it to fix the seal groove. Put me next in line. It's the left one in the pic.

Ken
Edison, NJ

 

[tubbedamx]

I have one that's in great shape but has the hub sleeve on it to fix the seal groove. Put me next in line. It's the left one in the pic.

Ken
Edison, NJ

View attachment 1715596231

PM Sent

 

[davescuda]

I have one also if still needed

 

[GreyWizard]

I have one but it is not perfect. It did however, come off of a working engine.

 

[tubbedamx]

Found one.

thanks everyone