[Found!] 360 magnum harmonic balancer and V belt pulley

-
Status
Not open for further replies.

wes beem

Well-Known Member
Joined
Apr 16, 2017
Messages
973
Reaction score
585
Location
ohio
Rating - 100%
7   0   0
Contact seller
If i read correctly, my one piece cast harmonic balancer/Serpentine pulley is not compatible with the V belt setup and LA timing cover i want to run.

So looking to buy whatever pulley and balancer it is i need.


my motor is a 2000.

314405376_169938212322375_6028587375457228167_n.jpg


313436069_169484915701038_4847091880592416670_n.jpg
 
As far as I'm aware, the Magnum never came with V belts.
 
As far as I'm aware, the Magnum never came with V belts.
They didnt, but the pre 2000 ones had a 2 pieces harmonic balancer that you could remove the pulley and bolt up the v belt one instead of the one i have where the serpentine pully and balancer itself are one piece unit.
 
If i read correctly, my one piece cast harmonic balancer/Serpentine pulley is not compatible with the V belt setup and LA timing cover i want to run.

So looking to buy whatever pulley and balancer it is i need.


my motor is a 2000.

View attachment 1716007271

View attachment 1716007272
Summit Racing has two balancers to fit your engine for less than $110 each. You'll need a pulley.
 
I "think" I bought a Magnum balancer at Mancini and used the entire front end from a 273...well, except I found a 70 timing cover to have timing marks on the drivers side (that are almost impossible to see),
 
They didnt, but the pre 2000 ones had a 2 pieces harmonic balancer that you could remove the pulley and bolt up the v belt one instead of the one i have where the serpentine pully and balancer itself are one piece unit.
Thanks Wes! Used to be what we had to do to run V belts on a Magnum was change out the timing cover for an LA and run LA stuff. Nice to see there are other options now.
 
Thanks Wes! Used to be what we had to do to run V belts on a Magnum was change out the timing cover for an LA and run LA stuff. Nice to see there are other options now.
Im doing that as well for mechanical fuel pump. But the problem is the LA balancer is weighted different so you have to use an early magnum one
 
Status
Not open for further replies.
-
Back
Top