[Found!] 360 or 318 Engine Block Mounts

-
Status
Not open for further replies.
scooby67

scooby67

Well-Known Member
Joined
Sep 4, 2011
Messages
416
Reaction score
83
Location
CT
Rating - 100%
1   0   0
Contact seller
Looking for engine block mounts for a 360.
I’ll take 318’s, also. I can modify them.
Not spool type. Going into a 72 Dart with a small block K frame. Thanks!
 
Last edited:
Ask for 318 mounts. You have a better chance. And we will tell you how to modify them for $5 in parts.
 
Copy this photo. Weld it. My finished mount when done. Just a extra ear off a junk mount or you could use scrap metal and copy the ear from the other side as a pattern. Bam. One driver side 360 mount for a A body. Spacing will be spot on so you don't have to shim it either. Cost? $5 for your buddy to weld it.

20180424_122607 (1).jpg


20180424_122636 (1).jpg


20180428_215134 (1).jpg
 
72Dart6pack said:
Copy this photo. Weld it. My finished mount when done. Just a extra ear off a junk mount or you could use scrap metal and copy the ear from the other side as a pattern. Bam. One driver side 360 mount for a A body. Spacing will be spot on so you don't have to shim it either. Cost? $5 for your buddy to weld it.

View attachment 1715757624

View attachment 1715757625

View attachment 1715757626
Click to expand...

Would you please PM me? I have a question about some mounts I recently picked up. Thanks!
 
Status
Not open for further replies.
-

Back
Top