A arh Well-Known Member Joined Aug 28, 2006 Messages 165 Reaction score 0 Dec 12, 2013 #1 Anyone have detailed pics and info on the modifications needed for the motor mount for a 360 going in place of a 318 in a 69 barracuda
Anyone have detailed pics and info on the modifications needed for the motor mount for a 360 going in place of a 318 in a 69 barracuda
70aarcuda Master Hoader of SBM Legendary Member Joined Jan 16, 2005 Messages 16,639 Reaction score 5,967 Location las vegas Dec 12, 2013 #2 passenger side is the same mount...it is the driver side that is different....
A arh Well-Known Member Joined Aug 28, 2006 Messages 165 Reaction score 0 Dec 12, 2013 #3 Do you have any info on the modification needed for the driver side?
67Dart273 Well-Known Member Joined Oct 14, 2010 Messages 60,035 Reaction score 33,296 Location Idaho Dec 13, 2013 #4 Some time ago, "Crackedback" had some good photos of the differences, and how to mod one to fit the other Here's one thread http://www.forabodiesonly.com/mopar/showthread.php?t=187599
Some time ago, "Crackedback" had some good photos of the differences, and how to mod one to fit the other Here's one thread http://www.forabodiesonly.com/mopar/showthread.php?t=187599
RichardJ916 Well-Known Member Joined Jun 30, 2010 Messages 1,059 Reaction score 177 Location Howell Michigan Dec 13, 2013 #5 Here's a good web site, I used them when I replaced the 273 to 360 into my 360 Duster back 2 years ago.... http://www.engine-swaps.com/Pages/Instructions.html Attachments IMAG0009.jpg 84.8 KB · Views: 125 IMAG0072.jpg 54.6 KB · Views: 136 558585_2516567092195_1793770338_1500443_278017476_n.jpg 99.9 KB · Views: 123
Here's a good web site, I used them when I replaced the 273 to 360 into my 360 Duster back 2 years ago.... http://www.engine-swaps.com/Pages/Instructions.html
Snake Mopar Nut Joined May 22, 2006 Messages 9,452 Reaction score 489 Location Belleville Canada Dec 13, 2013 #6 I just welded a piece than drilled a hole. Attachments sony pic 267.jpg 51.2 KB · Views: 134
ir3333 Well-Known Member Joined Jun 1, 2008 Messages 5,836 Reaction score 1,571 Location ontario,canada Dec 13, 2013 #7 here's one i modified. the donor mount donated its' ear for the 318 drivers' side mount beside it. ...this will still require a 1/4 " spacer,if i get ambitious i may cut a 1/4" out and re weld it. Attachments 004.jpg 61.7 KB · Views: 108
here's one i modified. the donor mount donated its' ear for the 318 drivers' side mount beside it. ...this will still require a 1/4 " spacer,if i get ambitious i may cut a 1/4" out and re weld it.