694spd
Well-Known Member
Did the 360 engine ever come with a factory installed windage tray?
360 Windage Tray?
- Thread starter 694spd
- Start date
-
ValiantRacing
Well-Known Member
I have never seen one.
moparmat2000
Well-Known Member
Police version maybe?
Professor Fate
Push the button, Max...
Yup. The 360 cop motors (E58), Little Reds (EH1), and the 360 roller motors (pre-Magnum) had trays from the factory.
Yes they did and they are a little different then 340's
694spd
Well-Known Member
Has anyone modified a 340 tray to fit the wider 360 main cap bolt position?
Professor Fate
Push the button, Max...
In addition to the wider bolt spacing, the 360 trays (and DC trays) are a bit deeper to clear the 360's longer stroke.
here are some pictures
dirty white boy
50 yr old Juvenal delinquent
any chance for a windage tray in a pre magnum roller 318?? and if not, witch tray would work??
moparmat2000
Well-Known Member
My guess would be a 340 windage tray would work on a 318. Same stroke crank, same main cap bolt spacing.
No they are different . They are the same as a 360. The bolts are different for a 318 but can be shimmed using Hemi head bolt washers as seen above. 318 360 are the same I believe I have all three I can check and get some pics when I come across them in this mess. There is a big box of them here somewhere
694spd
Well-Known Member
Oldmanmopar, is the tray in your picture that has the slotted mounting holes a Mopar
Performance P4529790 windage tray?
Also, interesting is the two different style main cap bolts that the tray mounts to.
Any info. on what came with what?
Performance P4529790 windage tray?
Also, interesting is the two different style main cap bolts that the tray mounts to.
Any info. on what came with what?
lemondana
BlackDart
The '74 360 4 bbl in the Dart Sport, Duster 360, Cuda 360, and the Challenger Rallye 360 had them.
Can I get one for my 360 based 408?
JohnnySpeed
Active Member
I just pulled my 360 apart, i dont think so, I'll look tomorrow. If it does I'll post pics to you. The pan is real short, oil pan that is
The tray with the slotted holes came from a 1978 318 4bbl police car. The shorter bolt with the taller head is for the tray with the slotted holes. These with fit a 273, 318, 360. The longer bolts with the shorter heads are for the 340 which have taller main caps. the washers make them usable on the 273-318-360. The trays interchange as long as you have the correct bolts.
The 360 in my 91 B300 van had one.
4eighteener
Well-Known Member
I have a 1987 marine 360 that came with a windage tray. I can post pictures of it tomorrow if you want.
abodyjoe
Well-Known Member
does anyone even sell those bolts any more? i couldn't find them.
I personally don’t know if the extra stuff is clears stock windage trays. If you don’t mind, taking your oil pan to find out…. We can test.
Milodon - ARP - perhaps Pioneer.
4eighteener
Well-Known Member
Ironmike
Well-Known Member
I have one in my shed from a 73 Ramcharger 360. Factory. So we know they came with one.
Thanks, Rob. That was an old post. I've since cured my problem with a very slightly used Kevco from a FABO member. Everything looks and fits perfectly.
-
