361 Wedge motor with original 518 heads

[jdprdise]

Reposting in another section to get more infor before I post price. THanks

 

[toolmanmike]

The 361 is not worth much at all. The 518 heads are worth a fortune. They are supposed to be early 60's max wedge heads. Google "518 Mopar heads"
toolman

 

[Arco440]

Welcome to FABO I am sure there's going to be someone on here to help you As it's not me But there are some smart ****'s here.

 

[RustyRatRod]

That's probably 516 not 518. And they are not too desireable. Small valves, small ports. The 915 castings may be what you are confusing them with. Now, if they are 518 Max Wedge heads, that may be a little different. But first and foremost, this ain't EBay. You don't just post up "make me a offer". You read the rules first posted very plainly. PRICE, LOCATION and PICS. This will be deleted unless you read and follow the rules.

 

[oldkimmer]

..............Do they have the heat cross over.......518s dont.........kim.........

 

[67Dart273]

..............Do they have the heat cross over.......518s dont.........kim.........

^^^^^^^ I'd bet money these are not "max" heads.^^^^^

 

[gregpurcell]

I have two sets of 516 heads for $50 set. the cast 6's and the cast 8's look very similiar when greasy.

 

[krazykuda]

If they are really 518 heads, let me know. I'll take them.

Anything else... Not so much...

 

[mcodecuda]

Most likely 516's. No one made a max wedge intake for a low block plus you would have to notch the cylinder bore for valve clearance since the max wedge valves are so large