440 source sells the stroker kit. C.I. is in the 430's depending on your bore.
Member fisher built a 431 stroker with a 440 crank turned down and cut the counterweights 0.100" to fit the block.
I want to say with the Diamond flat tops Edelbrock heads and a lunati solid voodoo cam, pushed over 525hp....
Can someone confirm that you can use a 440 crank & rods to build a 383 stroker. (434ci.) & if so is that all the bigger you can build one with that combo. Has anyone built one them selves ?
I wasn't sure so didn't want to say.. it would require custom one off pistons I'm sure..note: I don't think you can use a rod with a bigger than .990 pin
Nice article Andy......