[Found!] 4 Barrel Carb Kick-down Lever

-
Status
Not open for further replies.
dart_man440

dart_man440

Mopar 4 Life
Joined
Nov 7, 2004
Messages
278
Reaction score
83
Location
Arizona
Rating - 100%
5   0   0
Contact seller
Hello everyone, am helping a friend of mine with his project and noticed that he doesn't have the correct 4 Barrel Carb Kick-down Lever. (It's for a SB the one from the carb to the butterfy). Please let me know if you have one you can spare. Thank you,
 
So people know what you are talking about.

Like this?

2F612901-BE0A-4AA5-84B5-9C788541DFF7.jpg


☆☆☆☆☆
 
Or like this?
upload_2021-9-25_10-54-37-jpeg.jpg

Or this?
NsXPmDQwHaFj?w=224&h=180&c=7&r=0&o=5&dpr=1.1&pid=1.jpg

Or this?
6R5qvTogHaHa?w=168&h=180&c=7&r=0&o=5&dpr=1.1&pid=1.jpg

A little information about what he has/is working on, or some pics would help a bunch.
 
The first one you pictured is from a later f-body. It will work. The second one is from and E-body or 71 up B-body . That is a one piece rod and will not work on an A-body. You need three piece linkage due to the firewall being close. The orange is 340 727 4bbl. The blue is 904 318 2bbl. Notice the rod that goes to the carb is threaded for adjustment on both. The 904 F-bodies 4bbl's are not. The rod will work but note the lever and lower rod is different. Also clocked different. I use them but you will need to get the geometry right so they stay eye to eye Carb and trans . I included a picture of a 4bbl in a Duster with a 904 using the F-body 4bbl rod and linkage. It is used with a 904 trans and lever.

DSCF0121[2].jpg


DSCF2878[1].jpg


DSCF2912[1].jpg


DSCF2913.jpg


DSCF2914[1].jpg


DSCF2916[1].jpg


DSCN1065.JPG
 
That’s what I call helping someone out, not criticizing! Thank you Olmanmopar!
Oldmanmopar said:
The first one you pictured is from a later f-body. It will work. The second one is from and E-body or 71 up B-body . That is a one piece rod and will not work on an A-body. You need three piece linkage due to the firewall being close. The orange is 340 727 4bbl. The blue is 904 318 2bbl. Notice the rod that goes to the carb is threaded for adjustment on both. The 904 F-bodies 4bbl's are not. The rod will work but note the lever and lower rod is different. Also clocked different. I use them but you will need to get the geometry right so they stay eye to eye Carb and trans . I included a picture of a 4bbl in a Duster with a 904 using the F-body 4bbl rod and linkage. It is used with a 904 trans and lever.

View attachment 1716053390

View attachment 1716053391

View attachment 1716053392

View attachment 1716053393

View attachment 1716053394

View attachment 1716053395

View attachment 1716053396
Click to expand...
 
I picked this up at the Mopar Super Swap in Melbourne Florida today.

Think it is what you are looking for.

20230225_184439.jpg


20230225_184246.jpg
 
Thank you all for your help. Please see attached picture for the lever I need. I should have been a little more specific in what I needed. I only need the lever and the butterfly, I have everything else to help my friend. If you have a comment not conducive to my post, please be respectful and keep it to yourself or PM me and we can discuss, if you are looking for the same item be respectful and post your own wanted add. Admin, thank you for helping with the hijacker post, if you see anything wrong with this post please let me know. Thank you,

Kickdown.jpg
 
dart_man440 said:
Hello everyone, am helping a friend of mine with his project and noticed that he doesn't have the correct 4 Barrel Carb Kick-down Lever. (It's for a SB the one from the carb to the butterfy). Please let me know if you have one you can spare. Thank you,
Click to expand...
Hello everyone, still looking if you can help!
 
I might have something I will send pictures in a week or so
 
Just got home I will post a pic of my stuff in a few minutes
 
Status
Not open for further replies.
-

Back
Top