Dragnut
Well-Known Member
Thanks to the rainy Pa. weather I have finished the 4 link install today. I cant say enough about the quality Reilly Motorsports products, very nice stuff....
4 Link Install
- Thread starter Dragnut
- Start date
-
Dragnut
Well-Known Member
another
Are the wheel wells stock, minitunbed or stretched. Tires look huge for a stock dart wheel well if I were to guess
Dragnut
Well-Known Member
They are Mini Tubbed...I have 1 1/2 clearance on both sides.
Moses
Member
What size wheel and tire are you running on the rear?
Dragnut
Well-Known Member
295/50/R15
What about wheel size and offset?
Dragnut
Well-Known Member
It’s a 15” rimwith 5.250 offset
famous bob
mopar misfit
If I had that much room , I`d be getting bigger tires !!
I have 295 65 15`s on my 68 fastback and it aint tubbed !
Dragnut
Well-Known Member
You have 12” wide tires on the back of your cuda with stock wells.. let’s see it
famous bob
mopar misfit
YES, BUT YOU WILL HAVE TO SEND ME A PHONE # FOR PICS, I CANT PUTTEM UP ON HERE. Nothing seems to work !
Front of fender wells stretched to the inner fender /keeping the stock contour , well massaged inner fender panel (experience on the old hemi car back in the day), true 3/4" offset spring hangars, 3 1/2" rear spacing prostars/ 8" wide, running 22 pounds , outer fender lip rolled , full caltrac system .
About 9/16" clearance everywhere, maybe 1/2" on the springs. Been running them this way for about a yr and a half. rear end is a little higher than I`d like , but ---------
Last edited:
-
