70DusterGuy
Member
I have an A-833 4 speed tranny with the 4.35'' retainer bearing. What would happen if i used the bellhousing that has the larger retainer bearing hole?
4 speed bellhousings?
- Thread starter 70DusterGuy
- Start date
-
70DusterGuy
Member
It is not an overdrive unit.
dustya_383
Well-Known Member
Need an adapter ring
70DusterGuy
Member
Do you know where I can get one?
Coronet 500
Well-Known Member
dustya_383
Well-Known Member
Do you know of those fit the Lakewood bells??
I believe it will, my Lakewood came with a spacer and fits the one tranny I have perfectly, the other tranny I have has the larger bearing retainer and it doesn't need the spacer.
Pm me the diameter of your bell housing and I'll try and measure mine before I bolt it back together.
You can also replace the bearing retainer to get the right diameter for the bell housing. Go to the Brewers Performance site.
dustya_383
Well-Known Member
Oh ok thanks guys ill be ordering one.. What's the damages if one isn't used?? I didn't have one for a while
-
