[SOLD] 4 Speed OD Aluminum Case Transmission

-
Status
Not open for further replies.
B

bradfields

Well-Known Member
Joined
Apr 6, 2010
Messages
182
Reaction score
9
Location
Indiana
Rating - 100%
5   0   0
Contact seller
The shifter, rods, etc. have sold, I still have the transmission for sale, there is no speedometer housing or gear.

$200.00 plus shipping from Indiana - zip 47872
EFCE5955-CF93-4149-AD3B-6765CAA1850F.jpeg
844003C4-1F81-4011-ABED-0A8573B816A4.jpeg
1F798A76-ADDF-49EB-AC96-876E0735DA38.jpeg
D67D0DDB-AB19-4422-B768-2438C89ABA3E.jpeg
14623C1D-D5AB-40FA-BD58-24F4EC693160.jpeg
7C1A59A7-DDA2-44C1-AA05-5F04BFD82604.jpeg
2EE4CDD7-4BB8-4060-89B7-B053F47E4C9C.jpeg
FB833F05-21CD-4D73-A714-A0B6391AFAA9.jpeg
 
Will this bolt up to the small block mopar bell housing or was this one of the ones that had the GM pattern?
 
Rakers_SS said:
Will this bolt up to the small block mopar bell housing or was this one of the ones that had the GM pattern?
Click to expand...

That's a Chrysler truck a833OD. Yes, it will bolt right to a small block bellhousing.
 
RustyRatRod said:
That's a Chrysler truck a833OD. Yes, it will bolt right to a small block bellhousing.
Click to expand...
It will depend on which small block bellhousing. The input bearing retainer is slightly bigger then a regular A833 transmission. Thanks to Brewers Performance for the information and the measurements to make it fit.
 
easymotorspo said:
It will depend on which small block bellhousing. The input bearing retainer is slightly bigger then a regular A833 transmission. Thanks to Brewers Performance for the information and the measurements to make it fit.
Click to expand...

I was assuming everybody knew that. My bad.
 
Status
Not open for further replies.
-

Back
Top