DiggerDart
Well-Known Member
Anyone have any opinion on Indy heads 426 small block stroker engine? Just seems to me that those cylinder was would be paper thin.
What is the bore and stroke?
426"/ 440" LA Bracket Master | |
725 Horsepower @7400 RPM | |
600 Torque @5500 RPM | |
Indy 360-1 Intake 1x4 | |
Engine ran with Brad Penn 30WT break in oil | |
New 59 Degree R3 Water Block | |
4.100" Bore--4.000" Stroke | |
Eagle H-Beam Rods | |
Diamond 14:1 Pistons .984 Pins | |
Indy 360-1 CNC 245 Alum Heads | |
2.100 x 1.65, 63cc Chambers | |
Eagle 4340 Crank 4.00" Int. Balanced | |
Comp Roller Cam R-2 | |
T & D Needle Bearing Rockers 1.6 x 1.6 .576 / .597---.254 / .262---S108 | |
Sheet Metal Valve Covers | |
950 DP CFM Holley Carb | |
Indy Oiling System | |
MSD Distribuitor | |
ICH Plug Wires | |
Engine Internally Balanced |
wow.. that is a bit nuts.. i believe the hughes one is 4.030x4.185.. too lazy to look. I'm hoping to build one for next year
426"/ 440" LA Bracket Master 725 Horsepower @7400 RPM 600 Torque @5500 RPM Indy 360-1 Intake 1x4 Engine ran with Brad Penn 30WT break in oil New 59 Degree R3 Water Block 4.100" Bore--4.000" Stroke Eagle H-Beam Rods Diamond 14:1 Pistons .984 Pins Indy 360-1 CNC 245 Alum Heads 2.100 x 1.65, 63cc Chambers Eagle 4340 Crank 4.00" Int. Balanced Comp Roller Cam R-2 T & D Needle Bearing Rockers 1.6 x 1.6
.576 / .597---.254 / .262---S108Sheet Metal Valve Covers 950 DP CFM Holley Carb Indy Oiling System MSD Distribuitor ICH Plug Wires Engine Internally Balanced
Take a look at @Johnny Mac at blueprint, he has a great stroker.wow.. that is a bit nuts.. i believe the hughes one is 4.030x4.185.. too lazy to look. I'm hoping to build one for next year
4.100 with 4" stroke would be 422 or am I wrong[/URL]
426"/ 440" LA Bracket Master 725 Horsepower @7400 RPM 600 Torque @5500 RPM Indy 360-1 Intake 1x4 Engine ran with Brad Penn 30WT break in oil New 59 Degree R3 Water Block 4.100" Bore--4.000" Stroke Eagle H-Beam Rods Diamond 14:1 Pistons .984 Pins Indy 360-1 CNC 245 Alum Heads 2.100 x 1.65, 63cc Chambers Eagle 4340 Crank 4.00" Int. Balanced Comp Roller Cam R-2 T & D Needle Bearing Rockers 1.6 x 1.6
.576 / .597---.254 / .262---S108Sheet Metal Valve Covers 950 DP CFM Holley Carb Indy Oiling System MSD Distribuitor ICH Plug Wires Engine Internally Balanced
422.484.100 with 4" stroke would be 422 or am I wrong
The Indy heads have that reputation…. I think it would be a excellent screamer.Anyone have any opinion on Indy heads 426 small block stroker engine? Just seems to me that those cylinder was would be paper thin.
4.180 stroke….wow.. that is a bit nuts.. i believe the hughes one is 4.030x4.185.. too lazy to look. I'm hoping to build one for next year
Your comparing a banana to a cave man club.Take a look at @Johnny Mac at blueprint, he has a great stroker.
422.48…. Close enough for me!4.100 with 4" stroke would be 422 or am I wrong
4.185 X 4.18 = 460.544.100 with 4" stroke would be 422 or am I wrong
I agree on caveman! But I was thinking OP was contemplating building a stroker?The Indy heads have that reputation…. I think it would be a excellent screamer.
4.180 stroke….
Your comparing a banana to a cave man club.
He is also asking about cylinder heads more so over the stroker size.
I agree on caveman! But I was thinking OP was contemplating building a stroker?