440 start up

[Tds1967cuda]

Hi I have a 1969 440 freshly rebuilt no tranny
I’d like to run the engine with no trans I have a starter adapter plate and a flex plate on the engine
can I buy a flex plate with the ring gear built in to start the engine if so what size ring gear ?
any help would be greatly appreciated. Thank Tim

 

[4mulas]

You need something with a ring gear like a torque converter for your flex plate or something more easy, a flywheel.
Or one of those cranks like on the front of a model T and someone like the Incredible Hulk to turn it over.

 

[RustyRatRod]

No. You'll need either a manual transmission flywheel, a converter or the front half of a converter.

 

[mopar head]

a converter

That would be interesting watching a converter winging around on the back of an engine @ 2000 rpm... unsupported.

 

[RustyRatRod]

That would be interesting watching a converter winging around on the back of an engine @ 2000 rpm... unsupported.

There was someone on here who has just done it. It didn't wobble at all. That was my concern as well. He said the flex plate held it just fine.

 

[Tds1967cuda]

You need something with a ring gear like a torque converter for your flex plate or something more easy, a flywheel.
Or one of those cranks like on the front of a model T and someone like the Incredible Hulk to turn it over.

Thanks lmao

 

[Tds1967cuda]

No. You'll need either a manual transmission flywheel, a converter or the front half of a converter.

Thanks I’ll look into the manual trans flywheel

 

[Tds1967cuda]

No. You'll need either a manual transmission flywheel, a converter or the front half of a converter.

Thanks for the info