Not even a remote chance!Possible exhaust plugged up?
The rocker shaft pedestals are not at the correct height for anything but a stock motor. To get the geometry right, that has to be addressed. Search the net for Mopar rocker geometry, and start reading and comparing photos. Hint: My user name might come in handy for that search. Your head will be so full, you probably won't sleep well tonight.So if geometry is off, what do I need to do to correct? Installed per Comp Cam recommendation Please explain. Sorry, just learning this part of it!
Thanks for the info! Btw... the heads and rockers I bought as a matched set! I bought these from another member, who had this setup on a running motor. All I had to do is replace springs! I will dig into though! I may find it has all been corrected, unless Cam change changes things! Thanks again!The rocker shaft pedestals are not at the correct height for anything but a stock motor. To get the geometry right, that has to be addressed. Search the net for Mopar rocker geometry, and start reading and comparing photos. Hint: My user name might come in handy for that search. Your head will be so full, you probably won't sleep well tonight.
Btw, a centered sweep pattern is probably one of the most misguided pieces of information Mopar folks have been given over the years, and Comp plays right along by promoting it.