[FOR SALE] 485 CID low-deck

[ValiantS]

Selling my fresh motor with NO 1320ft hits, less than 8 660ft passes. Good sonic ck and part fill 400 blk, (I have about $2500 into block alone.) alloy caps and bushed lifter bores. 4.0" Crower light crank $$$ with 2.1 BME rods. Custom gas-port Diamond dish pistons 11:1 comp. 1950 bobweight. Titanium 2.25" Indy SR 360cfm. .735" NET lift. TD rockers. (Over $4500) Manton pushrod oiling. Indy rev flow. Currently shows about 800HP with 35* plently of tuning left to play and learn. Plenty of pics and documentation on this website. I'm keeping the TR intake manifold, valvecovers, timing drive, and dry sump. It would make a good NSS motor, I do have a low-deck mod-man intake. I will set it up to your application. Plenty of options to negotiate, I'm going for bigger power. Serious inquires only. $12,000

 

[toolmanmike]

Selling my fresh motor with NO 1320ft hits, less than 8 660ft passes. Good sonic ck and part fill 400 blk, (I have about $2500 into block alone.) alloy caps and bushed lifter bores. 4.0" Crower light crank $$$ with 2.1 BME rods. Custom gas-port Diamond dish pistons 11:1 comp. 1950 bobweight. Titanium 2.25" Indy SR 360cfm. .735" NET lift. TD rockers. (Over $4500) Manton pushrod oiling. Indy rev flow. Currently shows about 800HP with 35* plently of tuning left to play and learn. Plenty of pics and documentation on this website. I'm keeping the TR intake manifold, valvecovers, timing drive, and dry sump. It would make a good NSS motor, I do have a low-deck mod-man intake. I will set it up to your application. Plenty of options to negotiate, I'm going for bigger power. Serious inquires only. $12,000

View attachment 1715821162

Pics?