a493demon
Active Member
Selling my 493 .
Iron indy -1's that I just had done over the winter by porter racing heads .
30 over 440 block
Arp main and head studs.
Pro gram billet steel main caps .
Indy billet alum. rear seal retainer.
new nitrated comp. solid flat tappet cam.
4.15 4340 crank
H beam rods
Ross pistons.
milodon duel line swinging pick up.
This engine went 10.10 1/4 in my 3380lb. car
and a 6.03 1/8 on a 175 shot of nitrous.
This engine has less then 20 pass's on it .
6 where 1/8th mile nitrous pass's (Norwalk mmw)
The cam was ordered to be easy on the valve spring's .
The eng. was just freshened less then 20 pass's ago by competition wedge.
With more tuning it should go in the high 9's on motor.
Prob. would have went in the 5.9's with the nitrous if the front would have stayed down.
I am prob. forgetting some thing but any questions feel free to PM me here .
Only selling because I am going a different direction with my motor program.
This would make a great bracket motor .
does not come with water pump , dist., or carb.
I have a factory water pump housing to go with it if you would like.
make offer worse I can say is no.
pic. taken before it was finished .
asking 6500.OBO
click pic. for video of engine running.
[ame=http://i1158.photobucket.com/albums/p609/a493demon/engrun004_zps3387669e.mp4]
[/ame]
Iron indy -1's that I just had done over the winter by porter racing heads .
30 over 440 block
Arp main and head studs.
Pro gram billet steel main caps .
Indy billet alum. rear seal retainer.
new nitrated comp. solid flat tappet cam.
4.15 4340 crank
H beam rods
Ross pistons.
milodon duel line swinging pick up.
This engine went 10.10 1/4 in my 3380lb. car
and a 6.03 1/8 on a 175 shot of nitrous.
This engine has less then 20 pass's on it .
6 where 1/8th mile nitrous pass's (Norwalk mmw)
The cam was ordered to be easy on the valve spring's .
The eng. was just freshened less then 20 pass's ago by competition wedge.
With more tuning it should go in the high 9's on motor.
Prob. would have went in the 5.9's with the nitrous if the front would have stayed down.
I am prob. forgetting some thing but any questions feel free to PM me here .
Only selling because I am going a different direction with my motor program.
This would make a great bracket motor .
does not come with water pump , dist., or carb.
I have a factory water pump housing to go with it if you would like.
make offer worse I can say is no.
pic. taken before it was finished .
asking 6500.OBO
click pic. for video of engine running.
[ame=http://i1158.photobucket.com/albums/p609/a493demon/engrun004_zps3387669e.mp4]
