Bill Dedman bill dedman Legendary Member Joined Oct 16, 2007 Messages 3,987 Reaction score 140 Location Conway, Arkansas Jan 29, 2013 #1 Message deleted by OP
A ateam A motor can Joined May 22, 2010 Messages 264 Reaction score 3 Location Winchester, CA. Feb 10, 2013 #2 Bill, You might want to check with "flatlander racing". They were clearancing some /6 parts. Good Luck, ateam.
Bill, You might want to check with "flatlander racing". They were clearancing some /6 parts. Good Luck, ateam.
Bill Dedman bill dedman Legendary Member Joined Oct 16, 2007 Messages 3,987 Reaction score 140 Location Conway, Arkansas Feb 13, 2013 #3 ateam said: Bill, You might want to check with "flatlander racing". They were clearancing some /6 parts. Good Luck, ateam. Click to expand... Thanks; I'll do that!!!:blob:
ateam said: Bill, You might want to check with "flatlander racing". They were clearancing some /6 parts. Good Luck, ateam. Click to expand... Thanks; I'll do that!!!:blob:
pishta I know I'm right.... Joined Oct 13, 2004 Messages 23,824 Reaction score 13,683 Location Tustin, CA Feb 13, 2013 #4 They got jack....just looked unless you want some K1 rods for $400
Bill Dedman bill dedman Legendary Member Joined Oct 16, 2007 Messages 3,987 Reaction score 140 Location Conway, Arkansas Feb 14, 2013 #5 pishta said: They got jack....just looked unless you want some K1 rods for $400 Click to expand... Those K-1 rods are for a cast crank; won't work with a forged one. I didn't see anything I needed at this point...
pishta said: They got jack....just looked unless you want some K1 rods for $400 Click to expand... Those K-1 rods are for a cast crank; won't work with a forged one. I didn't see anything I needed at this point...