69FBCuda
Stand back 10' for your viewing pleasure & Safety
Contact seller
65 Barracuda/Valiant 10" Front brake drums, backing plates, hubs, spindles and beat up caps. Left and Right.
Pulled from a 1965 Barracuda V8.
4" Bolt pattern
Front brake drums, backing plates, spindles, knuckles, hubs. Left and Right.
Bearings, washers and crown nuts are in labeled bags
Note that the mounting bracket is straight up to the upper ball joint and not offset
One of the adjuster cables is missing.
No lugs
Not separating at this time.
$250 shipped in 2 boxes $30 max per box, $310 total shipped max
Paypal accepted-buyer pays fees if any, Check, M.O.
Thanks FABO
Pulled from a 1965 Barracuda V8.
4" Bolt pattern
Front brake drums, backing plates, spindles, knuckles, hubs. Left and Right.
Bearings, washers and crown nuts are in labeled bags
Note that the mounting bracket is straight up to the upper ball joint and not offset
One of the adjuster cables is missing.
No lugs
Not separating at this time.
$250 shipped in 2 boxes $30 max per box, $310 total shipped max
Paypal accepted-buyer pays fees if any, Check, M.O.
Thanks FABO