65 Dart Trans hump

[CMKirk]

Hello!!

I'm converting my '65 Dart to an A833 OD. Ive already done some research, so I know that the floor trans hump will be near impossible to find, and that no one makes them anymore.

So...

Has anyone successfully modified a '67 hump to work on a '65? If so, how extensive was the metal work?

Thanks...

 

[junkyardhero]

1963-66 A-BODY FLOOR TUNNEL FIBERGLASS - Mopar A833 4-Speed Transmission & Component Specialists

1963-66 A-BODY FLOOR TUNNEL FIBERGLASS

www.brewersperformance.com

 

[CMKirk]

http://[URL]https://www.brewersperformance.com/product/ft732-floor-tunnel-1963-66-a-body-fiberglass/

[/URL]

HOT DAMN!!!! Thank you!!

Last I read, the mold had been lost, and the part was NLA.

 

[junkyardhero]

HOT DAMN!!!! Thank you!!

Last I read, the mold had been lost, and the part was NLA.

i just installed one. fit up is pretty good.

you don't need to cut as much as you think you do. just keep that in mind.

 

[Professor Fate]

And honestly, they're not that elaborate. Some people will flame me for this, but if you have even basic metalworking skills, you could bend one up in (probably) about half an hour. Just make a cardboard template first. Only major issue is locating the shifter hole (round on a '65) properly. The rest is covered by carpeting.

 

[CMKirk]

And honestly, they're not that elaborate. Some people will flame me for this, but if you have even basic metalworking skills, you could bend one up in (probably) about half an hour. Just make a cardboard template first. Only major issue is locating the shifter hole (round on a '65) properly. The rest is covered by carpeting.

That's what I figured, based on pics Ive seen, but at this point Id rather pay the $150 and not have to f*ck with it...