For sale: what looks to be new(er) ball and cup pushrods and adjustable rocker arms from a 1966 Barracuda 273 engine. The engine has 276miles since rebuild- 10years ago. Car got hit just after the guy started rebuilding/ restoring it.
I currently do not have a 7”-8” micrometer to measure the push rods properly. I used a tape measure to get it close.
Rough over all length is 7-5/16”(-)
Rough usable length is 7-3/16”(+\-)
The rocker shafts have a little gouging on the bottom of the shafts but look like they possibly could be polished out or just replaced. The rockers themselves look pretty good. I had to keep the stand bolts and plates. Location is Southeastern Connecticut. I will ship at buyers expense.
I can take CC over the phone or check or cash or vendmo. $150 for shafts, rockers, spacers and pushrods.
Thanks!
Syleng1
I currently do not have a 7”-8” micrometer to measure the push rods properly. I used a tape measure to get it close.
Rough over all length is 7-5/16”(-)
Rough usable length is 7-3/16”(+\-)
The rocker shafts have a little gouging on the bottom of the shafts but look like they possibly could be polished out or just replaced. The rockers themselves look pretty good. I had to keep the stand bolts and plates. Location is Southeastern Connecticut. I will ship at buyers expense.
I can take CC over the phone or check or cash or vendmo. $150 for shafts, rockers, spacers and pushrods.
Thanks!
Syleng1
