66 Plymouth Valiant/ Barracuda fiberglass parts!?

-
ndeconte

ndeconte

Well-Known Member
Joined
Feb 6, 2014
Messages
246
Reaction score
84
Location
Rhode Island
I'm not sure if it's been posted here before or not, but I thought I'd post it again.....

Glasstek produces fiberglass parts for 66 Plymouth Valiant/ Barracuda!
Doors, front fenders, hood, trunklid and front and rear bumpers and dashboard.

Looks and sound like some quality parts! I was personally shocked to see this for a stand alone year body design!

Valiant |

Just ordered a rear bumper!

FF038_66_Valiant___Cuda_Fender_1.jpg
FF038_66_Valiant___Cuda_Fender_2.jpg
FF038_66_Valiant___Cuda_Fender_3.jpg
B7032_66_Valiant___Cuda_Front_Bumper_1.jpg
B7032_66_Valiant___Cuda_Front_Bumper_2.jpg
B7033_66_Valiant___Cuda_Rear_Bumper_1.jpg
B7033_66_Valiant___Cuda_Rear_Bumper_2.jpg
DB025_66_Valiant_Dashboard_2.jpg
H7064_66_Valiant___Cuda_pin_on_hood_2.jpg
H7064_66_Valiant___Cuda_pin_on_hood_3.jpg
 
I think early A's are pretty well supported in the fiberglass department!
 
65 valiant/battacuda flat pin on hood...no raised 'spine" i assume? These hoods weigh a ton!
 
pishta said:
65 valiant/battacuda flat pin on hood...no raised 'spine" i assume? These hoods weigh a ton!
Click to expand...

Look at the photos I loaded, looks like a center spine.......I think when they specify "flat", they mean no hood scoop.
 
65 Dartman said:
65’s still get no love - i see nothing from VFN
Click to expand...

AAR Fiberglass has a '65 hood. Between them, VFN, US Body source, Glasstek and others there is pretty good coverage. Everything from hoods, trunks, bumpers, doors, dash boards, pretty much whatever you want!
 
so, just wanted to give everyone my review on the company and part.......

Got my rear bumper in yesterday......ahead of schedule by two weeks I beleive. Packed nicely also!

Some photos of the actual bumper. They say they're not trimmed to size, but i think it just needs some minor clean up here and there. The fiberglass has some nice thickness to it also.......very well constructed and looks pretty much flawless from the quick once over I did on it!

Also, don't throw away the box without pulling the invoice out of the clear label.....mine had a nice Glasstek sticker in it! ;)

I personally will be purchasing again from Glasstek and would highly recommend the company!
20200714_153102.jpg
20200714_153109.jpg
20200714_153119.jpg
20200714_153126.jpg
 
Nice, now take it to a wrap shop and get it wrapped in "chrome" vinyl!
 
ndeconte said:
I'm not sure if it's been posted here before or not, but I thought I'd post it again.....

Glasstek produces fiberglass parts for 66 Plymouth Valiant/ Barracuda!
Doors, front fenders, hood, trunklid and front and rear bumpers and dashboard.

Looks and sound like some quality parts! I was personally shocked to see this for a stand alone year body design!

Valiant |

Just ordered a rear bumper!

View attachment 1715550555 View attachment 1715550556 View attachment 1715550557 View attachment 1715550558 View attachment 1715550559 View attachment 1715550560 View attachment 1715550561 View attachment 1715550562 View attachment 1715550563 View attachment 1715550564
Click to expand...

Arrrrrrrrrrrgh! That looks too nice to pass up! Now, I want some of that.
 
ndeconte said:
I'm not sure if it's been posted here before or not, but I thought I'd post it again.....

Glasstek produces fiberglass parts for 66 Plymouth Valiant/ Barracuda!
Doors, front fenders, hood, trunklid and front and rear bumpers and dashboard.

Looks and sound like some quality parts! I was personally shocked to see this for a stand alone year body design!

Valiant |

Just ordered a rear bumper!

View attachment 1715550555 View attachment 1715550556 View attachment 1715550557 View attachment 1715550558 View attachment 1715550559 View attachment 1715550560 View attachment 1715550561 View attachment 1715550562 View attachment 1715550563 View attachment 1715550564

Exactly - one year only they are made once ordered and I will order both bumpers friday thanks again for images.
Click to expand...
 
ndeconte said:
so, just wanted to give everyone my review on the company and part.......

Got my rear bumper in yesterday......ahead of schedule by two weeks I beleive. Packed nicely also!

Some photos of the actual bumper. They say they're not trimmed to size, but i think it just needs some minor clean up here and there. The fiberglass has some nice thickness to it also.......very well constructed and looks pretty much flawless from the quick once over I did on it!

Also, don't throw away the box without pulling the invoice out of the clear label.....mine had a nice Glasstek sticker in it! ;)

I personally will be purchasing again from Glasstek and would highly recommend the company!View attachment 1715561722 View attachment 1715561723 View attachment 1715561724 View attachment 1715561725
Click to expand...

I haven't seen many pictures of Mopar fiberglass parts. What kind of mounting hardware is provided for the bumpers?
 
No mounting hardware is supplied with the bumper.
I'll be making up some brackets to mount it, i'll keep everyone posted on the progress.
 
ndeconte said:
No mounting hardware is supplied with the bumper.
I'll be making up some brackets to mount it, i'll keep everyone posted on the progress.
Click to expand...

Are you bonding studs to the back side or do you have to drill bolts through it?
 
ndeconte said:
I'm not sure if it's been posted here before or not, but I thought I'd post it again.....

Glasstek produces fiberglass parts for 66 Plymouth Valiant/ Barracuda!
Doors, front fenders, hood, trunklid and front and rear bumpers and dashboard.

Looks and sound like some quality parts! I was personally shocked to see this for a stand alone year body design!

Valiant |

Just ordered a rear bumper!

View attachment 1715550555 View attachment 1715550556 View attachment 1715550557 View attachment 1715550558 View attachment 1715550559 View attachment 1715550560 View attachment 1715550561 View attachment 1715550562 View attachment 1715550563 View attachment 1715550564
Click to expand...
How much for the fenders
 
Davidsearle said:
How much for the fenders
Click to expand...
You need to contact the manufacturer. For both price and availability. This is an old thread and information from years ago will be incorrect.
 
You must log in or register to reply here.
-

Back
Top