[FOR SALE] 67-71 Dart Gauge Cluster Gaskets

-
Status
Not open for further replies.
Dana67Dart

Dana67Dart

The parts you don't add don't cause you no trouble
FABO Gold Member
Joined
Jul 16, 2017
Messages
16,463
Reaction score
13,858
Location
Northern Colorado
Rating - 100%
25   0   0
Contact seller
Gasket set for 67-71 Dart instrument cluster.

Designed from OEM parts, using the same type and thickness foam. Complete with peel and stick adhesive on the back sides, ready to install.

MADE IN THE USA!


The gaskets included in the kit are:
  1. One Oil Warning Light
  2. Two turn signal
  3. One 67-69 Brake Warning Light
  4. One 70-71 Brake Warning Light
  5. Two Fuel Gauge
  6. One ALT Gauge

NOTE: The 70-71 Brake Warning gasket is made from foam, the OEM gasket is made from rubber.

Each kit is $15.00 (US) shipped to a US address.

Payment by PayPal or Zelle

PayPal (I prefer Friends and Family but if you prefer to use PayPal's Purchase Protection that's ok by me)

PM me if you don't have a US address.

PXL_20241113_232745625.jpg
PXL_20241113_232755088.jpg


Part Identification (70-72 should be 70-71)
1731545046753.png





Installation photos to follow below.
 
Last edited:
Install brake warning gasket to the bezel.

Use a razor blade to assist with removing the backing.

67-69
NOTE: The gasket is a parallelogram and should follow the opening.
PXL_20241113_224518035.jpg


70-71
Note: The right side of the gasket is slightly angled to follow the opening
PXL_20241113_230104962.jpg


Next install the Turn Signal and Oil Warning Light lenses
PXL_20241113_230155337.jpg


The lenses should be placed in the cluster open end up as shown
This is the correct way to install
PXL_20241113_230212587.jpg


This is not correct
PXL_20241113_230208053.jpg


Place the gaskets over the lenses, center as best you can.
PXL_20241113_230508751.jpg
PXL_20241113_230410675.jpg


At this point this is what you should have.
PXL_20241113_230609694.jpg


Next the ALT Gauge
Place the wider foam strip on the right side as shown

NOTE: Protect the face plate and needle, have a helper hold the gauge by the edges as you apply the gasket
PXL_20241113_230845767.jpg


PXL_20241113_230915740.jpg

CONTINUED....
 
Last edited:
Next the Fuel Gauge

Place one each of the thin strips on either side of the Fuel Gauge as shown

NOTE: Protect the face plate and needle, have a helper hold the gauge by the edges as you apply the gasket
PXL_20241113_230635598.jpg
PXL_20241113_230811841.jpg




Final assembly....

Install the speedometer Head

PXL_20241113_231156596.jpg


Install the ALT Gauge

PXL_20241113_231221261.jpg


Install the Temp Gauge

PXL_20241113_231240140.jpg


Install the Fuel Gauge

PXL_20241113_231255977.jpg


This is what you should have at this point.

PXL_20241113_231326843.jpg


Install the cluster cover

PXL_20241113_231356519.jpg


Install the bezel

PXL_20241113_231427620.jpg
 
Last edited:
Status
Not open for further replies.
-

Back
Top