just pull...it's probably a little corroded. But it just pulls out.
I tried pulling......really really hard....and nothing....
just pull...it's probably a little corroded. But it just pulls out.
You really dont want to use water. There is a special product used for flushing a/c coils.
Consider this... When the gas leaks it takes some oil out with it. Thus an accumulation of dust and dirt apears. Most leaks are in the high pressure side of the system , i.e. condesor, compressor, hoses, and even more often in the fittings.
Bottom line, If that vaporator coil is clean and dry its probably fine.
If it has a oily nasty area, replace it.
I have a question though, we are looking at the 2 boxes and considering they are only held together by 1 bolt/mount plate in the middle, can these 2 boxes be installed seperately?? Or do we have to bolt the monster together and then wrestle with it??
Thanks
4spdragtop and ragtops Pop