Mr Man
Well-Known Member
I'm clearing out the spare parts from my 67 Barracuda project.
1. Trunk center trim. Very straight overall. Has a ding near the key hole. Includes all fasteners.
2. Trunk upper and lower trim. Upper piece can be restored I think. Lower piece has a few dents and scratches, it would take a good trim guy to salvage it.
3. Two passenger door exterior trims. One is nice and polished, has a hairline crack on the bottom edge that's barely noticeable when installed. The other has no cracks but has some gouges in it.
4. Chrome trim that goes along the top of the interior door trim panels. I have 2 passenger fronts, one passenger rear, and one driver front. Most are really straight, one of the passenger fronts is really pitted in an area that can't be seen when installed.
I tried to show all damaged areas. Let me know if you need additional pics.
$225 for all plus shipping. Located in Queen Creek, AZ 85142.
Thanks!
1. Trunk center trim. Very straight overall. Has a ding near the key hole. Includes all fasteners.
2. Trunk upper and lower trim. Upper piece can be restored I think. Lower piece has a few dents and scratches, it would take a good trim guy to salvage it.
3. Two passenger door exterior trims. One is nice and polished, has a hairline crack on the bottom edge that's barely noticeable when installed. The other has no cracks but has some gouges in it.
4. Chrome trim that goes along the top of the interior door trim panels. I have 2 passenger fronts, one passenger rear, and one driver front. Most are really straight, one of the passenger fronts is really pitted in an area that can't be seen when installed.
I tried to show all damaged areas. Let me know if you need additional pics.
$225 for all plus shipping. Located in Queen Creek, AZ 85142.
Thanks!
