67 fastback interior

-
S

stan marshall

Well-Known Member
Joined
May 21, 2009
Messages
145
Reaction score
0
Location
northern mi
Can anyone tell me how to get the rear interior side panels off my 67 fastback? I took out all the screws but they still will not come off. I want to repaint them and i could a much better job if they were off the car.
Thanks stan
 
Someone out there must have taken the panels off. The guy helping me knows a lot about old cars but we don't want to break anything so any help would be good.
Thanks stan
 
The piece that starts under the rear side window and goes back
around the fastback window. I got the piece that connects both sides in the back off but i can't get the side pieces off.
Thanks stan
 
well

1. they are screwed in
2. they are overlapping

I had to use some sliding and pulling

the large piece under the rear window needs to be pushed up and forward (toward the front of the car)

Did you take off any of the stainless trim? if not that needs to be taken off as well. Just have to be careful when pulling off because the retaining clips tend to break...but furtunately you can find those clips on most mopar restoration sites e.g. year one
 
You must log in or register to reply here.
-

Back
Top