[WANTED] 68 Barracuda Rear License Plate Hanger

[my68barracuda]

see photo.

tucked under the rear bumper is a license plate light and below that in the center of the rear roll pan appears to be a mounting hole,, what I need is the rear license plate bracket for a '68 Barracuda, not sure what it looks like as cars typically have a rear license plate mounted,,

thanks

 

[RedFish]

I think only a rubber bumper goes in that hole. Then you're missing the 2 plastic push in nuts where the tag is affixed. Someone mud over those 2 square holes?

 

[my68barracuda]

I think only a rubber bumper goes in that hole. Then you're missing the 2 plastic push in nuts where the tag is affixed. Someone mud over those 2 square holes?

Interesting, I'll look on the back side of the roll pan to see if I can find the holes for the push nuts, thanks

 

[1969383S]

Yep the white nylon push in plate holders were mudded over.

Top hole is for push in black anti rattle bumper.

 

[cannucky]

is it the camera angle or is that rear valance pushed way under ? the plate mount surface should be near vertical .

 

[fishy68]

The holes must be mudded over. My 68 Cuda doesn't have a bracket, just square holes for inserts

 

[cosgig]

All 67-69 Cuda license plates mount the same way as suggested above, with 2 push in screw retainers and one rubber vibration bumper!!