'68 Barracuda rear quarter window mounting washers

-
6

68cuda

Member
Joined
Apr 18, 2007
Messages
17
Reaction score
4
Location
Woodinville, WA
Getting the '68 Barracuda Fastback ready for the paint shop so yesterday I pulled the rear quarter windows and regulators. The rear quarter windows bolt directly to the window regulator using "snouted rubber washers" (my term - see pic.) to protect the hole in the glass and both sides of the window from direct contact with the steel bolt. My washers are shot after 44 years.

Where do you get new ones??? I haven't been able to find them yet - and I know I'm not using the correct name for them.

Thanks.
 

Attachments

  • Rubber glass mount washer.JPG
    39.2 KB · Views: 167
CUUDAK
Thanks! I spoke with Tom at R/T Specialties and he has the parts.

Turns out these same parts are used on all 66-72, A-bodies and a bunch of B-bodies:
#3035054 Gasket, quarter window to casting (need 4 per side)
#2216544 Window track insulator, rubber (need 2 per side)

Installation per quarter window on each of the two mounting bolts is :
Washer-Track Insulator-Washer, with a washer on each side of the window and the track insulator/grommet through the window glass over the bolt.
 
You must log in or register to reply here.
-

Back
Top