68 valiant front side markers

Moparmase · 2024-11-24T15:19:18-0600

Can anyone help identify the wiring in the pictures attached? I’ve looked up wiring diagrams and seems there should only be one wire going to the side markers which I assume is the yellow connector. Anyone know what the black connector is for? I figured it’s a ground but not sure what it’s for. My headlights, running lights and front blinkers work fine.

TheGrateRonzini · 2024-11-24T16:27:03-0600

TheGrateRonzini · 2024-11-24T16:28:55-0600

Provision for fender indicator? Could probably test the lead with the blinker on to verify

67Dart273 · 2024-11-24T19:12:48-0600

The factory manual shows dark green, one wire. The markers are park circuit, not on the turn signals. Wire L17-18DGN goes through the bulkhead connector to the R terminal on the light switch, which is the tail/ marker lights

67Dart273 · 2024-11-24T20:34:20-0600

By the way you put your question in "general discussion." You really should consider putting stuff in the categories designed, as there is an electrical section. No harm no foul, but for the future

Moparmase · 2024-11-24T21:51:07-0600

TheGrateRonzini said:
Provision for fender indicator? Could probably test the lead with the blinker on to verify

Not a bad thought, I'll try testing it.

68 valiant front side markers

Moparmase

Member

TheGrateRonzini

FABO Gold Member