70 dart scoops

[justswinger]

Im new at this need help where do I get info to do work properly on a project. My son has a 70 dart wants to mount the 340 scoops on hood I think I see where the large hole in the hood goes there is a cut out on the strut under the hood but what size is the hole to be cut. Also where is the proper scoop location on the top side of the hood?

 

[Burntorange70]

Check out this old thread. It has a diagram in there.



Go Here.
http://www.forabodiesonly.com/mopar/showthread.php?t=22641&page=2

 

[Burntorange70]

BTW

Welcome to FABO!

 

[justswinger]

thanx for the help if I get responses like this all the time my sons project will go alot easier good work burntorange70

 

[Burntorange70]

Your welcome. Any time. Got any pics of your sons car. We all would love to see it.

 

[justswinger]

do you know the size of studs used to mount the scoops we have the scoops but no mounting hardware

 

[70DartMike]

do you know the size of studs used to mount the scoops we have the scoops but no mounting hardware

I had some of the studs when I put mine on, but they broke (age I assume), so I used #10 woodscrews with washers. They bit right into the scoop screw holes.

 

[justswinger]

I would like to know what size and thread are the original anchors I think they are studs

 

[Burntorange70]

I could not tell you. Never had mine off. You could try taking a scoop with you to the hadware store and seeing what screws in there. Mabby get some all thead and cut it down to the langth you need. If that don't help you. Keep bumping this post up. Mabby some one will see it that knows.