[SOLD] 70 Duster 340 w/ 20ft Pace Trailer

-
Status
Not open for further replies.
dusterdave79 said:
I'm not seeing any pics of a duster???
Click to expand...
LOOK HERE:


www.forabodiesonly.com

[SOLD] - 70 Duster 340 w/ 20ft Pace Trailer

Turn key, Ready to Run, add gas and go. Health forces sale. $16,500 or best offer over that. 1970 H code 340 Duster and 20ft Pace enclosed trailer and everything that goes with it. Load up, Ready to race today @ 2910 Lbs. less driver Great car, add gas and go. Solid Southern Life / Central...
www.forabodiesonly.com www.forabodiesonly.com
 
Still available.

Will sell just the car and spare parts.
Taking offers. PM only.
.
.
IMG_2377.jpg


IMG_2591.jpg
 
IMG_E3441 vin.JPG


IMG_E3442 title.JPG


IMG_7419.JPG


IMG_3446 motor title.JPG


Trailer - is sold on a clear transferable title in my name
Car - is sold on this official Florida Bill of Sale:
Included is the title shown above.

VINCheck® Lookup | National Insurance Crime Bureau

About VINCheck
www.nicb.org www.nicb.org

VINCheck® Results
VIN: VS29HOB323731

VINCheck® Theft Record
VIN: VS29HOB323731 has not been identified as a vehicle listed in the VINCheck® Theft Records.

VINCheck® Total Loss Record
VIN: VS29HOB323731 has not been identified as a vehicle listed in the VINCheck® Salvage Records.

VINCheck® is updated regularly as additional information is reported.

.
 
FABO members only - Christmas special value.
LIMITED TIME OFFER ... Then the spare 340 sells separate

I will include this in the package price.

1972 340 Motor +.030 short block, pan on, dist still in it, cam looks fine, 90 deg adapter
2.02 J heads off for inspection
Stock rebuild, Removed running, low miles, no ridge, crosshatch shows.
Inspect, Clean and reseal

NEW PARTS that go with it....
  • Oil pan New Speedmaster
  • Speedmaster 12 point head stud kit
  • MP Rocker shims
  • Chain set
  • Rocker arms stock
  • Push rods
  • Gasket set - full
  • Freeze plugs brass
  • Dip stick and tube Speedmaster
  • Valve Cover Stud
  • Hyd lifters
  • Edlebrock valve spings

USED
  • Purple cam .450 lift, nice
  • Choice of intake - OEM cast square bore or Offy 360 deg
  • Edlebrock fuel pump
  • Cheap chrome Valve covers
  • Stock valve covers
  • Stock 727 convertor
I'll get some pictures posted.
 
Last edited:
70 Buster 340 said:
FABO members only - Christmas special value.
LIMITED TIME OFFER ... Then the spare 340 sells separate

I will include this in the package price.

1972 340 Motor +.030 short block, pan on, dist still in it, cam looks fine, 90 deg adapter
2.02 J heads off for inspection
Stock rebuild, Removed running, low miles, no ridge, crosshatch shows.
Inspect, Clean and reseal

NEW PARTS that go with it....
  • Oil pan New Speedmaster
  • Speedmaster 12 point head stud kit
  • MP Rocker shims
  • Chain set
  • Rocker arms stock
  • Push rods
  • Gasket set - full
  • Freeze plugs brass
  • Dip stick and tube Speedmaster
  • Valve Cover Stud
  • Hyd lifters
  • Edlebrock valve spings

USED
  • Purple cam .450 lift, nice
  • Choice of intake - OEM cast square bore or Offy 360 deg
  • Edlebrock fuel pump
  • Cheap chrome Valve covers
  • Stock valve covers
  • Stock 727 convertor
I'll get some pictures posted.
Click to expand...
Sent you a private message, very interested.
 
Well, not sure what to say about this Duster. I met with Bob, he is an incredible guy and accomplished car builder. He's put in decades of knowledge into building this car. I can't say enough about his patience teaching me about this car. He really loves it and I believe he feels good about the Mopar guy who purchased it. We spent the afternoon talking cars, not just Mopars so don't freak out! Found out we had alot in common regarding different makes. I want to thank him for a wonderful afternoon of
education on car building and safety. Car is an absolute beast! 65'

20240103_153426.jpg


View attachment 1716187609

20240103_145931.jpg


20240103_145948.jpg


20240103_150013.jpg
 
Last edited:
Plymouth 65 said:
Well, not sure what to say about this Duster. I met with Bob, he is an incredible guy and accomplished car builder. He's put in decades of knowledge into building this car. I can't say enough about his patients teaching me about this car. He really loves it and I believe he feels good about the Mopar guy who purchased it. We spent the afternoon talking cars, not just Mopars so don't freak out! Found out we had alot in common regarding different makes. I want to thank him for a wonderful afternoon of
education on car building and safety. Car is an absolute beast! 65'
Click to expand...
Car has sold?
 
Are there any chassis mods? K member, coil overs, brakes. Back half or
frame connectors, moved spring location, shortened rear end, Caltracs? Looks like the leaf perches have been changed. I'm looking for something that will work with a larger displacement engine.
 
Sorry about the last post. I just realized there was a sale pending. Hope to see him at Milan this year.
 
lroman said:
Sorry about the last post. I just realized there was a sale pending. Hope to see him at Milan this year.
Click to expand...
Hey Iroman, you will definitely see me there and don't be a stranger. Come check out my new whip, o'l school race car. Thx, 65
 
lroman said:
Are there any chassis mods? K member, coil overs, brakes. Back half or
frame connectors, moved spring location, shortened rear end, Caltracs? Looks like the leaf perches have been changed. I'm looking for something that will work with a larger displacement engine.
Click to expand...
No. 65'
 
Status
Not open for further replies.
-

Back
Top