the mopar dude
Head Dude
This would make a good starter car for the person looking for a V-8 4-speed project. Healthy 318 4bbl with a slightly lumpy cam, Edelbrock performer aluminum intake and carb, headers, Mopar Performance valvecovers and air cleaner. 833 4 speed has been added. Was an a/c car when new and still has the a/c heater box under dash, but no components under the hood. Newer aftermarket replacement radiator. This was a 6 cylinder automatic car, and the K frame has been changed, as well as big bolt pattern disc brakes added. Rear end is a ford 8 inch. Has 15" slotted mags--Ansen in the rear and American Racing in the front. Rear tires are 295/50-15 and 205/60-15 in the front. Originally an EV2 Hemi Orange car with a couple repaints, and had the black side stripes and hood blackout. Black interior with aftermarket gauges and some kind of communist built bucket seats, useable as-is but might need some improvement in the future. Grille and tail lights in very nice shape and the glass is good. There is a bit of rust on the outer panels and trunk floor but the frame rails and cowl are in good shape. May need a small patch in the drivers floor. 1 of 173,592.
Car runs good and would make a nice build-as-you-drive project. With sone TLC and determination this could be a very satisfying project that wont break the bank.
All the pictures are at http://www.themopardude.com/2048086.html Any questions 620-364-8200
$3200 OBO
Car runs good and would make a nice build-as-you-drive project. With sone TLC and determination this could be a very satisfying project that wont break the bank.
All the pictures are at http://www.themopardude.com/2048086.html Any questions 620-364-8200
$3200 OBO
