72 Demon Power steering hose

[northeastmopar]

Mine was missing, so I bought a Saginaw pump for my car. It appears that the threaded pressure hose location on the back looks at the Kframe motor mount area and is only about 1.5" from it. I have a few old hoses and they all seem to take a longer sweeping turn that will hit the kframe. Can anybody here with a 72 demon look at their hose or maybe take a picture of that area so I can oprder the correct hose? Thanks...

 

[bad440]

is the saginaw pump like this?View attachment Img_00211.jpg

 

[northeastmopar]

is the saginaw pump like this?View attachment 1714641127

no, that looks like a Federal.

 

[NHscamp]

What hose did you end up using? I seem to have the same issue .

 

[GMachineDartGT]

The Saginaw pumps were on used in cars with biscuit mounts which have more room. I used a Pontiac hose which swings 180 degrees off the pump. I cut it it off and used a tube nut and flared a hard line from there.